Home

Forums

Stories

Knowledge Base

Business Community > Routers > Tp-link R470t+ : WAN and LAN on the same network

< Routers

Tp-link R470t+ : WAN and LAN on the same network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tp-link R470t+ : WAN and LAN on the same network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AntonioCaggese

2020-11-11 23:28:54 - last edited 2021-04-18 10:42:58

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-11-11

Tp-link R470t+ : WAN and LAN on the same network

2020-11-11 23:28:54 - last edited 2021-04-18 10:42:58

Model: TL-R470T+

Hardware Version: V7

Firmware Version:

Hi to all!

I want to buy the TL-R470T+ to balance and to failover 2 internet access in my home, I have a DSL modem and a 4G modem.

I want also to keep the actual IP addresses: in my home network, all the devices are in the same subnet 192.168.1.0/24.

The question is: with the TL-R470T+, it's possible to assign the following addresses to the ethernet ports?

LAN 192.168.1.1

WAN1 192.168.1.2 gateway 192.168.1.3 (DSL Modem)

WAN2 192.168.1.4 gateway 192.168.1.5 (4G Modem)

In this way, every device can decide which gateway to use.

Thanks!

Ciao

1 Reply

Emitplink

LV3

2020-11-12 21:27:07 - last edited 2021-04-18 10:42:58

Posts: 130

Helpful: 46

Solutions: 21

Stories: 0

Registered: 2020-02-11

Re:Tp-link R470t+ : WAN and LAN on the same network

2020-11-12 21:27:07 - last edited 2021-04-18 10:42:58

@AntonioCaggese

It is not possible,

you have to set both WAN with different subnet, example: WAN1 2.1 - WAN2: 3.1 and assign the LAN port and DHCP Server to subnet 192.168.1.1 in order to maintain the original LAN of your modem.

Your new gateway will be the 470+.

Regards

Tp-link R470t+ : WAN and LAN on the same network

Tp-link R470t+ : WAN and LAN on the same network

Information

Voters 0

Tags