TL-SG1016DE Dropping DHCP for Clients
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have a TL-SG1016DE Ver 3 with the latest firmware. It keeps dropping connectivity to cabled clients that turn off. The clients get the 169 default address. The only way to clear it is to drop the power and repower the switch. Have never had this happen on any other 1016's I have had. Switch power is connected to a Tripp-Lite rack mount UPS. Using the management tool to reboot doesn't clear it. Switch is connected to a Netgear which is connected to an Xfinity Xfi router. Clients that are on 24/7 keep their addresses. Only machines that turn off cannot get back on. There are all connected by Cat 8 Ethernet cables which I have switched out. Also, machines on the same network disappear from Windows 10 network. Wi-Fi from the Xfi always works so the problem lies in either the TP switch or the Netgear but clients I connect to the netgear do not have that problem and bouncing the Netgear doesn't clear it. Any suggestions?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Fae wrote
We're interested in this issue, would you mind our senior engineer contacting you via the email address you registered in the community?
Or if you prefer to contacting us by yourself, please feel free to file a ticket to contact TP-Link support.
Thank you in advance for your time. Do let us know if you need any further assistance, we'll be glad to assist you.
Hi, people work for TP-Link might not able to see this thread immediately.
You should contact them directly and send them this thread and tell them.
Like Fae said, they are interested in this issue, just feel free to file a ticket to contact TP-Link support. 
- Copy Link
- Report Inappropriate Content
Dear @malda,
malda wrote
I've got the same issue with TL-SG1024DE 3.0, FW 1.0.1 Build 20180629 Rel.58591. After some time (days to weeks), DHCP for cable clients connected into this switch stops working. Reboot from web mgmt does not solve the issue, only unplugging the switch from electricity.
Here is a beta firmware that may fix the issue. If you are willing to try it, follow the link below to download the beta firmware for upgrading.
Note: copy the whole link below and paste in the address bar of your web browser for downloading
For TL-SG1024DE 3.0:
https://static.tp-link.com/2020/202012/20201222/TL-SG1024DEv3_en_1.0.1_%5b20201218-rel49852(Beta)%5d_up.rar
For TL-SG1016DE 3.0:
https://static.tp-link.com/2020/202011/20201111/TL-SG1016DEv3_en_1.0.1_%5b20201110-rel40807(Beta)%5d_up.rar
For TL-SG1016PE 1.0:
https://static.tp-link.com/beta/2021/202101/20210119/TL-SG1016PEv1_en_1.0.1_%5b20210114-rel37936%5d_up.zip
Edit: add beta firmware for TL-SG1016DE 3.0, TL-SG1016PE 1.0. It can be downgraded if the beta firmware doesn't help.
We'd encourage you to give us feedback on the case so that we can be confident of the solution here. Thank you!
- Copy Link
- Report Inappropriate Content
Dear @Fae,
thank you for your message. I can try it; just to be sure - in case of any problems, is it possible to downgrade to actual FW version?
Thank you & best regards,
Jan
- Copy Link
- Report Inappropriate Content
I'm experiencing issues when using static IP addresses as well, so don't think this is necessarily a DHCP issue. Didn't get a chance to do the Port mirroring / Wireshark capture method yet, will update this thread when the issue happens again.
- Copy Link
- Report Inappropriate Content
@Da_Gunny_USMC I dumped the switch and got two QNAP 2.5 GbE switches and no more problems plus more than twice the speed.
- Copy Link
- Report Inappropriate Content
@Fae I am having the same issue with TL-SG1016DE 3.0. Can you please provide beta firmware for this model? Thanks!
It is currently on 1.0.1 Build 20180629 Rel.58355
- Copy Link
- Report Inappropriate Content
Looks like it's not a DHCP issue, it's affecting clients with static IP addresses as well. I'll try to mitigate it by keeping the clients connected to the switch at all times by enabling WOL on client devices and other similar strategies, as I believe that worked in the past for me. Though the issue needs to be addressed by a software update if possible.
- Copy Link
- Report Inappropriate Content
Im experiencing the same issue with TL-SG1024DE 3.0. Tried the beta software, but Im not even sure if it "upgraded", because the firmware version in system info stayed the same.
EDIT -
Tried downgrading to the oldest version I could find TL-SG1024DEv3_en_1.0.1_[20170530-rel39402]_up, but that didn't change the version shown in system information either.
EDIT 2 -
After pulling power it started showing the oldest version that i upgraded it to.
EDIT 3 -
After a bunch of resets, reboots and hard resets I managed to get the beta version installed. Hopefully this fixes the issue with DHCP.
- Copy Link
- Report Inappropriate Content
Testing beta firmware on SG1016DE v3, will post an update soon...
- Copy Link
- Report Inappropriate Content
As an update on my issue with TL-SG1024DE 3.0. It seems to me that the beta update did indeed fix my issue. Haven't had any trouble since I installed the beta firmware on 2021-05-29.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 5191
Replies: 21
Voters 0
No one has voted for it yet.