Business Community > Pharos Wireless Bridges > wbs210 with ant2415ms and cpe 210 client
< Pharos Wireless Bridges

wbs210 with ant2415ms and cpe 210 client

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

wbs210 with ant2415ms and cpe 210 client

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
wbs210 with ant2415ms and cpe 210 client
wbs210 with ant2415ms and cpe 210 client
2020-06-01 14:20:03
Model: Adapter  
Hardware Version:
Firmware Version:

im having drop of tx and rx rate from 25mbps basestation to 3 to 4 mbps to client in a distance of .586km. there are a lot of 2.4 radios in the area and some obstruction like trees

can anyone help me config. it properly 

 

 

 

 

  0      
 
  0      
 
#1
Options
2 Reply
Re:wbs210 with ant2415ms and cpe 210 client
2020-06-03 10:42:02 - last edited 2020-06-03 10:43:32

@cgmedina,

 

  • disable MAXtream if this is a PtP link,
  • change WiFi mode to 802.11n only,
  • change channel to »Auto«,
  • make sure antennas are properly aligned (use the »Antenna Alignment« tool).

 

Consider use of CPE510 for a PtP link in the 5 GHz band if you cannot improve the situation in the 2.4 GHz band.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:wbs210 with ant2415ms and cpe 210 client
2020-06-30 02:24:14

@R1D2 thx for the reply.

I just figured lt out.

The antenna elevation of pole antenna requires 40f and above and finding a better sport without obstactractions 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 750

Replies: 2

Related Articles
 CPE-210 in AP Client Router mode
976 0
 CPE 210 Client mode no internet
1025 0
 2 cpe 210. Ap and Client
842 0
 CPE 210 low mbps in client
1076 0
 Router connected to CPE 210 Client
1961 0
 CPE 210 ACCES POINT AND CLIENT
1215 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.