BruMa wrote

I have 10 oc200 on different clients with at least 10 EAPS on each. some clients 110out, 115, 225out, 225, 245 EAP110 out, EAP 115, are not able to take advantage of any of the roaming functions and other functions, among others, nor SSID capacity of more than 8, therefore, for robust solutions this is not up to par. If an EAP belongs to a suite, which is capable of needing ROAMING, because it has 4 EAPs or more, and this does not PERFORM ROAMING, then it does not serve what it was conceived for. This is not my invention, you can check tplink's DATA SHEET to corroborate it.

@BruMa 

do you may if i setting one of them?

:)

Hii @BruMa 

100mbps 1 router 1 oc200 10 AP for 20 user right?

first we have to make sure that input to router to AP to only 1 user device is 100mbps with this topology
100mbps --> cable cat5 --> router (default setting) --> cable cat5 --> AP (default setting) --> 1 device (example 1 laptop and test speed got 100mbps)
    if from AP to laptop got 100mbps go next step to setting to 20 device (check 9 other AP)
    if from AP to laptop do not got 100mbps than cek router with this topology
    100mbps --> cable cat5 --> router --> cable cat5 --> 1 device 
        if from Router to laptop got 100mbps than replace AP with other AP
        if from Router to laptop do not got 100mbps than check cable 
        100mbps --> cable cat5 --> router --> new cable cat5 --> 1 device 
            if from Router to laptop got 100mbps than use new cable cat5 
            if from Router to laptop do not got 100mbps than ask your ISP

if from every 10 AP to 1 laptop got 100mbps go next step to setting to 20 device
make sure all 10 AP setting is default than all you have to do is 
    1. make one SSID at 2,4Ghz every AP (SSID1_2,4Ghz for AP1, SSID2_2,4Ghz for AP2, ect) and one SSID at 5Ghz if supported every AP (SSID1_5Ghz for AP1, SSID2_5Ghz for AP2, ect)
    2. make same password for all SSID
    3. add 20 mac address from 20 user device to all 10 AP
    4. no limit bandwidth
    5. all user do is save automatically all SSID in their device so when they activate their device, the device will automatically go to the best signal SSID
        if user move, then ask him/her to turn of wifi and turn on again to get the best signal or just tap the best SSID

hope useful
thx