Home

Forums

Stories

Knowledge Base

Business Community > Routers > How to set both Public IP & Port in Virtual Server or NAT

< Routers

How to set both Public IP & Port in Virtual Server or NAT

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to set both Public IP & Port in Virtual Server or NAT

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

hamedfazel

2019-12-13 16:56:33 - last edited 2021-04-19 11:39:53

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2019-12-13

How to set both Public IP & Port in Virtual Server or NAT

2019-12-13 16:56:33 - last edited 2021-04-19 11:39:53

Model: TL-R480T+

Hardware Version: V5

Firmware Version:

Hello

we have Muitiple Public IP. In creating virtual servers or NAT I need to set both Public IP and port

Example

Public IP 17.6.5.4 port 789
Private IP 192.168.0.11 port 5555

Public IP 16.5.4.3 port 789
Private IP 192.168.0.12 port 4444

Please guide me

Thank You

Router: TPLink TL-R480T+

1 Reply

Andone

LV4

2019-12-16 03:11:49 - last edited 2021-04-19 11:39:53

Posts: 747

Helpful: 115

Solutions: 18

Stories: 0

Registered: 2018-07-19

Re:How to set both Public IP & Port in Virtual Server or NAT

2019-12-16 03:11:49 - last edited 2021-04-19 11:39:53

@hamedfazel

You have multiple public IP address. So you have used multiple WAN ports, or one WAN port has multiple public IP address? If one WAN port has multiple public IP, did you achieve that with one to one NAT?

And do you mean to access your internal server from the public network? If yes and you use multiple WAN, then you can use Virtual Server to achieve your requirements. Just set two item for virtual server for each WAN port.

How to set both Public IP & Port in Virtual Server or NAT

How to set both Public IP & Port in Virtual Server or NAT

Information

Voters 0

Tags