Business Community > WiFi > Omada - how check network speed and duplex ?
< WiFi

Omada - how check network speed and duplex ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Omada - how check network speed and duplex ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Omada - how check network speed and duplex ?
Omada - how check network speed and duplex ?
2019-10-07 07:06:54
Model: EAP245  
Hardware Version: V1
Firmware Version: 1.4.0 Build 20180323 Rel. 32551

Hi,

 

I'm using EAP245 with Omada 3.0.x:

 

I have one EAP that seems stuck to 100 mbps speed, but it is located on ceiling.

Before investigating with big ladder, I have checked with Omada LAN information but

unfortunately only stats are displayed, is it hidden or unavailable ?

 

If unavailable, it should be nice to be added in a future version ;)

 

Overview tab:

MAC Address : B0-4E-26-2E-XX-XX
IP Address : 192.168.1.94
Model : EAP245
Firmware Version : 1.4.0 Build 20180323 Rel. 32551
CPU : 3%
Memory :49%
Uptime :3 days 17:24:11
 

LAN tab:

Rx Packets : 2788909
Rx Bytes : 2.53 G
Rx Drop Packets : 0
Rx Errors : 0 Bytes
Tx Packets : 1892205
Tx Bytes 665.06 M
Tx Drop Packets : 0
Tx Errors : 0 Bytes

 

 

Regards,

Michael

  0      
 
  0      
 
#1
Options
4 Reply
Re:Omada - how check network speed and duplex ?
2019-10-07 11:31:22 - last edited 2019-10-07 11:46:28

 

MikeFR wrote

I have one EAP that seems stuck to 100 mbps speed, but it is located on ceiling.

 

You could check the speed indicator of the switch the AP is connected to or by logging into the EAP using ssh and checking the eth0 settings:

 

1. Enable ssh in Omada controller/web UI

2. Connect to the EAP and execute those commands:

 

/ $ cat /sys/class/net/eth0/speed
1000
/ $ cat /sys/class/net/eth0/duplex
full
/ $

 

I guess you use wrong/unshielded patch cable if speed is limited to 100 Mbps.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  1  
  1  
#2
Options
Re:Omada - how check network speed and duplex ?
2019-10-08 08:40:01

@MikeFR 

 

Thanks, I'm not aware that I could login with SSH on EAP,

 

I'll try this as soon as possible

  0  
  0  
#4
Options
Re:Omada - how check network speed and duplex ?
2019-10-10 06:14:02
As you guess (and that was my fear), the AP is connected though a 100M cable
  0  
  0  
#5
Options
Re:Omada - how check network speed and duplex ?
2019-10-10 07:34:42

Shoud be no problem for an electrician to replace it, but give him exact specification of the cable to be used. wink

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 3490

Replies: 4

Related Articles
Port-Flapping and Duplex/Speed-Issues
1976 0
Suddenly speed apears 100mb full duplex in EAP
368 0
Force 10/half duplex
102 0
 Omada OC200 "General error" on Check for upgrade
2402 0
 How to check Check AP region?
408 0
 Duplicate Output in Network Tool -> Network Check (Ping/Traceroute)
34 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.