TP link with NAS and ip camera issues
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Iam unable to connect my Ip camera through the switch to my nas which is also connected to the switch any ideas is there speciications on the swtich which will not allow the connection?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Check the LED of switch port. Make sure your physical connection works fine.
Save the config and reset the switch. Generally it will not block packets under default settings.You also can try to ping your camera and NAS for comfirming if they are working.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
You can try to follow the FAQ to reset your switch.
https://www.tp-link.com/en/support/faq/2124/
Then remove all devices from the switch, only connect a PC to switch. Confirm whether you can ping its IP address and access the management web.
If you can access its management web, recommend to set a static IP address that has not IP conflict with other devices. Then try to use the switch again.
If you cannot enter the interface of Bootutil, maybe the switch is damaged.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 950
Replies: 3
Voters 0
No one has voted for it yet.