Omada Controller 2.7.0 (Windows)/EAP225-Outdoor_v1_1.3.0/EAP225_v3_2.3.0 have been released.

Omada Controller 2.7.0 (Windows)/EAP225-Outdoor_v1_1.3.0/EAP225_v3_2.3.0 have been released.

Omada Controller 2.7.0 (Windows)/EAP225-Outdoor_v1_1.3.0/EAP225_v3_2.3.0 have been released.
Omada Controller 2.7.0 (Windows)/EAP225-Outdoor_v1_1.3.0/EAP225_v3_2.3.0 have been released.
2018-07-27 02:18:41 - last edited 2018-10-23 06:32:13

Dear friends,

 

We are glad to share you that we have published Omada Controller 2.7.0 (Windows), which mainly adds Mesh and 802.11 k/v Fast Roaming function.(Mesh and Fast Roaming function require EAP products support these functions and upgraded to corresponding firmware.)

 

For now:

EAP225-Outdoor_v1 with 1.3.0 180614 version firmware supports Mesh and 802.11 k/v Fast Roaming function.

EAP225_v3 with 2.3.0 180628 version firmware support 802.11 k/v Fast Roaming function.

 

Mesh function introduction:

With Mesh function enabled, EAP products can establish wireless network by connect to each other with wireless connection. It can simplify network topology and network installation time, greatly improve wireless signal coverage range.

 

802.11 k/v Fast roaming function introduction:

In large networks with multiple access points, wireless communication comes at the risk of disrupted connections when wireless devices hop between APs. Fast Roaming eliminates this risk by automatically switching devices from one AP to other with a smooth transition. This allows sensitive applications like VoIP and video conferences to go uninterrupted. Fast Roaming requires that wireless clients support 802.11k/v to take effect.

 

 

You can download Omada Controller 2.7.0 (Windows) at following link:

https://www.tp-link.com/en/download/EAP-Controller.html#Controller_Software

 

You can download EAP225-Outdoor_v1_1.3.0 180614 at following link:

EU: https://www.tp-link.com/en/download/EAP225-Outdoor.html#Firmware

US: https://www.tp-link.com/us/download/EAP225-Outdoor.html#Firmware

 

You can download EAP225_v3_2.3.0 180628 at following link:

EU: https://www.tp-link.com/en/download/EAP225.html#Firmware

US: https://www.tp-link.com/us/download/EAP225.html#Firmware

 

 

 

PS: (Below are the detailed release note of Omada Controller 2.7.0 (Windows)/EAP225-Outdoor_v1_1.3.0/EAP225_v3_2.3.0 for your reference)

 

1. The release note of Omada Controller 2.7.0 (Windows)

 

New Feature/Enhancement:

1. Add support for Mesh networking which allows you to deploy EAP wirelessly.

2. Add support for Fast Roaming (802.11 k/v) which can improve user experience when roaming between the EAPs.

3. Add "Managed by others" status for the EAP managed by other Omada Controller before in Pending list.

4. Add username/password verification when forget and readopt disconnected EAPs.

5. Change the name of EAP Discover Utility to "Omada Discover Utility".

6. Optimize the SSID Override feature in EAP private configuration page.

7. Add icons for sea wave ceiling AP, wall-plate AP and Outdoor AP.

8. Enhance the security of sensitive information like Operator Password, Twilio AuthToken, Radius Password, etc.

Bug Fixes:

1. Fix the bug that the database volume grows too fast.

2. Fix the bug that EAP can't be managed immediately after reboot.

3. Fix the bug that the number of wireless clients on the Omada Controller page is inconsistent.

Note:

1. To use Omada Controller 2.7.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 2.7.X from 2.4.X or earlier version.

 

2. The release note of EAP225-Outdoor_v1_1.3.0 180614

 

Recommended Controller Software Version:  Omada Controller v2.7.x

New Feature/Enhancement:
1. Add support for Mesh networking which allows you to deploy EAP wirelessly.
2. Add support for Fast Roaming (802.11k/v) which can improve user experience when roaming between the EAPs.

Notes:
1. For EAP225-Outdoor_v1 only.
2. Mesh networking can only be used after the EAP is managed by Omada Controller 2.7.0 or higher version.
3. Mesh networking can only be used after upgraded your EAP to this or later firmware.
4. Fast Roaming requires that wireless clients support 802.11k/v to take effect.
5. If you managed EAP by Omada Controller, you can't manage this EAP by Web management page, unless you have reset the EAP.
6. Your device's configuration won't be lost after upgrading.

 

3. The release note of EAP225_v3_2.3.0 180628

 

Recommended Controller Software version: v2.7.x

New Feature/Enhancement :
Add support for Fast Roaming (802.11k/v) which can improve user experience when roaming between the EAPs.

Bug Fixed:
1. Fixed the bug that SSID with special characters will lead to https portal redirection failure.
2. Fixed the bug that Rouge AP detection will report AP with positive RSSI value.
3. Fixed the bug that MacBook can't open https page due to macOS doesn't support 512bit certificate key.

Notes:
1. For EAP225_v3 only.
2. Fast Roaming requires that wireless clients support 802.11k/v to take effect.
3. If you managed EAP by Omada Controller, you can't manage this EAP by Web management page, unless you have reset the EAP.
4. Your device's configuration won't be lost after upgrading.

  3      
  3      
#1
Options
7 Reply
Re:Omada Controller 2.7.0 (Windows)/EAP225-Outdoor_v1_1.3.0/EAP225_v3_2.3.0 have been released.
2018-07-27 11:40:47

jonas wrote

Mesh function introduction:

With Mesh function enabled, EAP products can establish wireless network by connect to each other with wireless connection. It can simplify network topology and network installation time, greatly improve wireless signal coverage range.

 

Hello Jonas,

 

that's great! Some questions re meshing:

  1. Can meshing be limited to the 5 GHz band so that 2.4 GHz remains reserved for clients like it is possible in IEEE 802.11s meshing?
  2. Does your meshing technology allow for encryption of the mesh network while a guest network with a separate SSID in the same frequency band is unencrypted? I.e. can I specify the SSID to use for meshing or does it use other ways to connect to the main AP and if so, is it encrypted?

 

Couldn't find answers to those questions in the V2.7 Omada Controller User's Guide or in the FAQs.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  2  
  2  
#2
Options
Re:Omada Controller 2.7.0 (Windows)/EAP225-Outdoor_v1_1.3.0/EAP225_v3_2.3.0 have been released.
2018-07-28 16:59:20

When will firmware for other eap will be released?

EAP110-Outdoor (v1)

EAP225 (v2)

EAP320 (v2) -> no update since 9/2017 ?

Thanks,
E-raser

  1  
  1  
#3
Options
Re:Re:Omada Controller 2.7.0 (Windows)/EAP225-Outdoor_v1_1.3.0/EAP225_v3_2.3.0 have been released.
2018-07-30 07:19:01

Hi E-raser,

 

Fast Roaming/ Mesh function may need hardware function support. EAP110-Outdoor_v1, EAP225_v2, EAP320_v1 may not support these function.

 

We are testing the new firmware of EAP330/320, maybe it will be published in the next month.

 

Best wish,

Jonas.lin

 

 

  2  
  2  
#4
Options
Re:Re:Omada Controller 2.7.0 (Windows)/EAP225-Outdoor_v1_1.3.0/EAP225_v3_2.3.0 have been released.
2018-07-30 10:05:18
Hi R1D2, As far as I know, EAP Mesh network just use 5GHz to make uplink connection. So 2.4GHz is remained for customer to use. The connection between Mesh AP and Uplink AP is established based on TP-Link private protocol. From user side, the connection is invisible and safe, so no need to warry about this :)
  3  
  3  
#5
Options
Re: Omada Controller 2.7.0 (Windows)/EAP225-Outdoor_v1_1.3.0/EAP225_v3_2.3.0 have been released.
2018-07-30 10:13:31

Hi Saber, thanks for the info! Meanwhile I saw that no SSID needs to be specified for the uplink, but good to know that it uses the 5 GHz band.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  1  
  1  
#6
Options
Re:Re:Re:Omada Controller 2.7.0 (Windows)/EAP225-Outdoor_v1_1.3.0/EAP225_v3_2.3.0 have been released.
2018-08-31 08:01:11 - last edited 2018-09-05 12:05:23

Hi @jonas ,

Any news on new firmware for EA320?

EAP330 has been released but nothing for the EAP320?

 

Grtz,

E-raser

  0  
  0  
#7
Options
Re:Re:Re:Re:Omada Controller 2.7.0 (Windows)/EAP225-Outdoor_v1_1.3.0/EAP225_v3_2.3.0 have been released.
2018-09-11 09:45:25

Hi E-raser,

 

We are testing the stability of the new firmware of EAP320, we will publish it soon.

 

Best wish,

Jonas

  1  
  1  
#8
Options