Hi, 

I have the same issue. Do you have any hint?

alainb wrote

Hi, 

 

I have the same issue. Do you have any hint?

If you mean that you need to allow the special IP address to be able to access your server in LAN, you can use virtual server and access control function to meet the requirement.

Hi

I have a similar problem.

I have followed the steps in https://www.tp-link.com/en/faq-2026.html Very useful, some item were diffrent menu locations,.

But I failed to get it to work.

Is there a way of getting Logs for debugging?

I looked at the logs (all levels) but the is no entry when i test the port forwarding. 

Is the reqest not geting there, or is port forwarding not logged?

Is ther another How to for my exact version? 

I have:

TL-ER6020 v2.0      2.0.2 Build 20180702 Rel.59031

tim3 wrote

Hi

I have a similar problem.

I have followed the steps in https://www.tp-link.com/en/faq-2026.html Very useful, some item were diffrent menu locations,.

But I failed to get it to work.

Is there a way of getting Logs for debugging?

I looked at the logs (all levels) but the is no entry when i test the port forwarding. 

Is the reqest not geting there, or is port forwarding not logged?

 

Is ther another How to for my exact version? 

I have:

TL-ER6020 v2.0      2.0.2 Build 20180702 Rel.59031

 

Hi tim3

You can disable the Access Contrl rule temporarily. Then try to access your server. Make sure that your port forwarding is working normally at first then enable Access Control rule.

If you don't mind, also can post the screenshot of your router's settings. Then we can help to check together.

Hi

thanks for your help 

 I am trying to  forward port 145  from  any WAN  to  LAN 192.168.2.2   I and using a non standard port, but it worked for years untill i  put in the  ER6020 router.

setup server type Sserve TCP 145

SetUp Server IP

Setup IP groups server and clinets

and last the firewall.

any helps sugestion apresheated.

Cheers

           Tim G

Please note that you still need to set up the Virtual Server. Just need to set up the external port(145-145) and internal port(145-145) and IP address (192.168.2.2), and choose WAN port.

@Anderson 

Hardware Version: TL-ER6020 v2.0

Firmware Version: 2.0.2 Build 20180702 Rel.59031

Hello,
Is there a problem with the TL-ER6020 V2 router regarding NAT?
It is impossible to forward a port to a server in the LAN!
I have an R600 VPN V4 router and it works directly!
Why doesn't it work with the TL-ER6020 V2?
I would like to be able to access from the WAN to the LAN on ports 22, 80 and 443!
I followed several ways of doing it on the Forum and the examples in the manual but it is impossible to function.
I do have a public address, not a private one.
Port Wan1 is activated and the others operate in LAN mode.
In the Transmission -> NAT -> Virtuals Servers section: ports 22, 80 and 443 are open on the TL-ER6020
Could you please provide me with the procedure to operate port forwarding?
Thank you.
Yours.