SG2210 speed port and voip issues
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
SG2210 speed port and voip issues
Model :
Hardware Version :
Firmware Version :
ISP :
Hi , recently i have installes many of these switches in diferent configurations.
its really my favorite switch , but i have 2 very important issues :
There is no way to connect at 1Gbps to the devices that already have POE
like Mimosa B5 and others , but with this model Never ever , not even at distances less of 3mts.
Other models can at distances of less than 10Mts, randomly)
i have the internal POE of 2210 deactivated , but in my test scenario y have already tested every possible conbination)
Mimosa Manifactures said that the problem is defective clock from sg2210 because if i connect the antenna directly to the computer
its connect to 1Gbps.
The other problem is more simple: if i set the DOS deffend active , the switch blocks all the sip traffic.
Help Welcome.
Regards
Hugo Petrucci
Hardware Version :
Firmware Version :
ISP :
Hi , recently i have installes many of these switches in diferent configurations.
its really my favorite switch , but i have 2 very important issues :
There is no way to connect at 1Gbps to the devices that already have POE
like Mimosa B5 and others , but with this model Never ever , not even at distances less of 3mts.
Other models can at distances of less than 10Mts, randomly)
i have the internal POE of 2210 deactivated , but in my test scenario y have already tested every possible conbination)
Mimosa Manifactures said that the problem is defective clock from sg2210 because if i connect the antenna directly to the computer
its connect to 1Gbps.
The other problem is more simple: if i set the DOS deffend active , the switch blocks all the sip traffic.
Help Welcome.
Regards
Hugo Petrucci
