Can't Power EAP110-Outdoor with TL-SG1016PE POE+ Switch
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't Power EAP110-Outdoor with TL-SG1016PE POE+ Switch
Model :
Hardware Version :
Firmware Version :
ISP :
When I plug the EAP-110 into a known good POE port on the switch, nothing happens.
The included POE injector does work. I am trying to bypass this though.
I am trying to track down why there are seconds of lag in the link between my local LAN and a device using this outdoor AP. It takes 6 seconds to load a web page served by a client with -50db signal. It takes 400ms using a different Asus AP to the same client using the same CAT6 cable.
Hardware Version :
Firmware Version :
ISP :
When I plug the EAP-110 into a known good POE port on the switch, nothing happens.
The included POE injector does work. I am trying to bypass this though.
I am trying to track down why there are seconds of lag in the link between my local LAN and a device using this outdoor AP. It takes 6 seconds to load a web page served by a client with -50db signal. It takes 400ms using a different Asus AP to the same client using the same CAT6 cable.
