Business Community > Pharos Wireless Bridges > CPE210/510: new firmware 2.1.11 released today (includes KRACK fix)
< Pharos Wireless Bridges

CPE210/510: new firmware 2.1.11 released today (includes KRACK fix)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
123

CPE210/510: new firmware 2.1.11 released today (includes KRACK fix)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE210/510: new firmware 2.1.11 released today (includes KRACK fix)
CPE210/510: new firmware 2.1.11 released today (includes KRACK fix)
2018-01-26 21:49:36 - last edited 2021-03-30 03:50:37
A new firmware 2.1.11 Build 20171228 Rel. 72837 for CPEs has been released today. Although it is listed as firmware for HW version 3, its FW version is 2.x and it installed fine on my CPE210 HW v1.0 and CPE510 HW v1.1.

From the release notes:
1. Fixed the WPA2 vulnerability.
2. Improved management VLAN performance.
3. Fixed the bug that sometimes the image can not be uploaded normally when using IE8.
4. Improved web UI display.
5. Fixed the bug that the "set source" can not be configured as a subnet range in SNMP.

Download links:
http://www.tp-link.com/de/download/CPE510_V3.html#Firmware
http://www.tp-link.com/de/download/CPE210_V3.html#Firmware

Note that the CPE210 firmware is for HW v3 and doesn't install on HW v1.0. However, I could install the CPE510 firmware also on CPE210 HW v1.0 as usual. For CPE210 HW v2/3 your mileage may vary.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0      
 
  0      
 
#1
Options
25 Reply
Re:CPE210/510: new firmware 2.1.11 released today (includes KRACK fix)
2018-01-26 22:34:25
CPE510's Pharos firmware also installs on my WBS210 HW v1.20. Seems to work fine so far.

I don't like the firmware and version naming scheme of TP-Link.

- Why shows the ZIP archive name a v3 version number, albeit firmware is actually v2 and even can be installed on HW v1?

- Why isn't the firmware name "Pharos_v..." rather than "CPE510_v..." if it installs fine on any other Pharos device, too?

This definitely is something TP-Link could improve (together with a single web page listing latest firmware versions for all business-class wireless products).
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:CPE210/510: new firmware 2.1.11 released today (includes KRACK fix)
2018-01-28 05:34:43

R1D2 wrote


4. Improved web UI display.


Didn't notice **any** UI changes after a quick test...did anyone?
Now serving finite customer via f(x)=AirTime/∞ on the 5Ghz band :-/
  0  
  0  
#3
Options
Re:CPE210/510: new firmware 2.1.11 released today (includes KRACK fix)
2018-01-28 17:36:13

RTouris wrote

Didn't notice **any** UI changes after a quick test...did anyone?


There have been issues with older Safari browser versions in FW 2.1.6, which now should be fixed in 2.1.11.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#4
Options
Re:CPE210/510: new firmware 2.1.11 released today (includes KRACK fix)
2018-01-29 04:35:12
how about changing the font size in survey, they sure are taking their sweet time with this one :/
Now serving finite customer via f(x)=AirTime/∞ on the 5Ghz band :-/
  0  
  0  
#5
Options
Re:CPE210/510: new firmware 2.1.11 released today (includes KRACK fix)
2018-01-29 23:54:46

RTouris wrote

how about changing the font size in survey, they sure are taking their sweet time with this one :/


Still waiting for this one.

Also, spectrum analysis is unusable in CPE210 without a change to narrow the frequency spectrum (like it is possible in CPE510 with selection list).
Maybe we should open tickets every month or so to speed up fixes of those issues! :)
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#6
Options
Re:CPE210/510: new firmware 2.1.11 released today (includes KRACK fix)
2018-01-30 03:37:46
fwiw I've never had a successful escalation of ANY ticket case opened with TP-Link, ever :(
Now serving finite customer via f(x)=AirTime/∞ on the 5Ghz band :-/
  0  
  0  
#7
Options
Re:CPE210/510: new firmware 2.1.11 released today (includes KRACK fix)
2018-01-30 19:08:52

R1D2 wrote


Also, spectrum analysis is unusable in CPE210 without a change to narrow the frequency spectrum (like it is possible in CPE510 with selection list).
Maybe we should open tickets every month or so to speed up fixes of those issues! :)


Was this bug tested with 2.1.11 Build 20171228 Rel. 72837? didn't realize that
  0  
  0  
#8
Options
Re:CPE210/510: new firmware 2.1.11 released today (includes KRACK fix)
2018-01-30 23:35:27

R1D2 wrote

A new firmware 2.1.11 Build 20171228 Rel. 72837 for CPEs has been released today. Although it is listed as firmware for HW version 3, its FW version is 2.x and it installed fine on my CPE210 HW v1.0 and CPE510 HW v1.1.
...
Note that the CPE210 firmware is for HW v3 and doesn't install on HW v1.0. However, I could install the CPE510 firmware also on CPE210 HW v1.0 as usual. For CPE210 HW v2/3 your mileage may vary.


I don't understand your first and last sentences? Aren't they in contradiction?
At first you say ... installed fine on my CPE210 HW v1.0..., and at the end
you say ...doesn't install on HW v1.0...

So which is true? I have CPE210 v.1.0 and could I try this new fw or not?
  0  
  0  
#9
Options
Re:CPE210/510: new firmware 2.1.11 released today (includes KRACK fix)
2018-01-31 00:03:46

ali_dzi wrote

I don't understand your first and last sentences? Aren't they in contradiction?
At first you say ... installed fine on my CPE210 HW v1.0..., and at the end
you say ...doesn't install on HW v1.0...

So which is true? I have CPE210 v.1.0 and could I try this new fw or not?


CPE210 hardware v1 -> use the CPE510 v3 firmware image (it's actually v2.1.11, not v3 as the ZIP archive name suggests).
CPE210 hardware v2/v3 -> use the CPE210 v3 firmware image (which also is v2.1.11, but only for CPE210 HW v2 or v3).
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#10
Options
Please help update stuck
2018-02-13 02:26:50
Dear Members

I was running 2.1.6 on CPE510v1.

However I had one issue that client CPE reboots whenever I access any webpage even when I access its configuration page

So to isolate issue, I reset the CPE and updated the firmware to 2.1.11 (v3) from the link given above

It got stuck at 76 percent and cpe510 Is not accessible any more.
Please see screen shot

How I proceed now, is CPE bricked already?

Thanks
File:
cpe error.JPGDownload
  0  
  0  
#11
Options
123

Information

Helpful: 0

Views: 11529

Replies: 25

Related Articles
CPE 210/510 how to discover
872 0
 New Omada App for iOS Released Today / SDN -- USA Market
2193 0
 New OC200 Firmware released.
871 1
TPlink CPE 510 firmware
6968 2
 Cpe 210 or cpe 510?
545 0
 CPE 210 or 510 anyone?
833 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.