T1700x-16TS SFP+ not working with Synology SFP+ Board

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

T1700x-16TS SFP+ not working with Synology SFP+ Board

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
T1700x-16TS SFP+ not working with Synology SFP+ Board
T1700x-16TS SFP+ not working with Synology SFP+ Board
2017-12-02 04:49:24
Model :

Hardware Version :

Firmware Version :

ISP :

I have tried to connect my Synology that support SFP+ and never get connected, no any indication of connection, I have Reset myT1700x-16TS switch and no any indication of connection. I'm wondering if there is some setting to enable that. I tried to connect my Synology with my other switch from Netgear XS708E and it get connected. I also tried to connect between my 2 switches and cannot get connection to the TP-Link. Please help if there is any setup to be done. I have reset my device twice, but no success. I can use all the RJ45 10GB, but not the SFP+. PLEASE HELP.
  0      
  0      
#1
Options
5 Reply
Re:T1700x-16TS SFP+ not working with Synology SFP+ Board
2017-12-06 14:26:31

issaalazri wrote

Model :

Hardware Version :

Firmware Version :

ISP :

I have tried to connect my Synology that support SFP+ and never get connected, no any indication of connection, I have Reset myT1700x-16TS switch and no any indication of connection. I'm wondering if there is some setting to enable that. I tried to connect my Synology with my other switch from Netgear XS708E and it get connected. I also tried to connect between my 2 switches and cannot get connection to the TP-Link. Please help if there is any setup to be done. I have reset my device twice, but no success. I can use all the RJ45 10GB, but not the SFP+. PLEASE HELP.


Are you use the SFP+ module from TP-LINK?
In my opinion, you should confirm thet your SFP+ module can work with TP-LINK switch firstly, then try to change the speed and duplex in web interface.
  0  
  0  
#2
Options
No Success
2018-01-20 00:05:43
I have used a new cable of TXC432-CU3M, Still having the same issue I'm wondering if there is some setting, I can connect between the synology and the Netgear switch using same cable, but cant connect through the TP-Link T1700x-16TS. Please help if there is setting can be done.
  0  
  0  
#3
Options
Re:T1700x-16TS SFP+ not working with Synology SFP+ Board
2018-01-22 18:29:27

issaalazri wrote

I have used a new cable of TXC432-CU3M, Still having the same issue I'm wondering if there is some setting, I can connect between the synology and the Netgear switch using same cable, but cant connect through the TP-Link T1700x-16TS. Please help if there is setting can be done.

You need not configure anything, you can do the simple test. Connetc two ports of T1700X-16TS via TXC432-CU3M(this is loop). I think the light will flash.
Did you change the Duplex and speed to force in T1700X and Synology?
  0  
  0  
#4
Options
Re:T1700x-16TS SFP+ not working with Synology SFP+ Board
2018-01-23 00:39:17
I have connected the 2 ports, yes the lights were flashing which means the device is working. As for the Duplex and speed have not changed in either devices.
  0  
  0  
#5
Options
Re:T1700x-16TS SFP+ not working with Synology SFP+ Board
2018-01-26 16:28:10

issaalazri wrote

I have connected the 2 ports, yes the lights were flashing which means the device is working. As for the Duplex and speed have not changed in either devices.


I think you need change the duplex to auto, I remember the default duplex is full.
  0  
  0  
#6
Options