Hi SOLP

First of all, make sure that your EAP had gained a correct IP address from the DHCP Server.
Or their IP would all be 192.168.0.254 so that the Controller cannot distinguish then.

Then make sure that your Controller can visit EAP successfully. You can ping the EAP's IP on the PC running the Controller to check it.

BTW, if your EAP and Controller are in different subnet, then the Controller cannot find EAP, because the EAP uses broadcast packet to declare its information.
So you should use EAP Discovery to help EAP find the Controller.
Also, you can configure the DHCP Option138 on your DHCP Server to tell the EAP where the Controller is.
So the value of DHCP Option138 is the IP address of the Controller.

El controller ve los EAP 225 sin problema, los ping llegan sin problema, desde el servidor que tendria instalado el EAP controller puedo acceder por web a todos los equipos, todos estan en la misma red sin embargo cuando paso los datos de usuario y pass queda en pending y nada termina dando timeout.

Please upgrade your EAP Controller to the latest as well. As you described, EAP225 and EAP Controller are in the same subnet and EAP Controller can find the EAPs? Tobe honest, understanding the questions via a google translate is not easy.