EAP245 wifi clients time out with Internet requests
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.EAP245 wifi clients time out with Internet requests
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hardware Version :
Firmware Version : EAP245(US)_V1_161116
ISP :
Hi,
I've got an EAP245 configured via the web interface. It's a home setup with a basic business-class set of devices (TP-Link TL-SG1024 swtich and TL-R600 VPN router/firewall). My wifi clients (phones/tablets etc) periodically time out with web requests but recover and usually complete the request after about 30 seconds without becoming disconnected from the EAP. It happens close or far from the router and the connection is maintained and is strong the entire time. I had upgraded form an Archer C50 where this wasn't an issue (just the regular weekly reboot of that VPN router when it takes a DHCP holiday). I've played with static IP's, Google's DNS / ISP's DNS and not seen any improvement.
I honestly don't know how to troubleshoot this. If I was at work, I'd toss it out or not buy from TP_Link to begin with. My first thought is to fire up and set it up via the controller software or use different SSID's for the 2.4 and 5Ghz bands. Any suggestions?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
[/URL]
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I cannot rule out that there's an issue with the LG G4 H812's, still Android 6.0. I've had to forget and reconnect the wifi several times as they appear to have issues maintaining connections to any of TP-Link wifi products. Only TP-Link products, I'm sure because I went all-in.
- Copy Link
- Report Inappropriate Content
Sorry if I'm bring a dead thread back to life.
But i've googled extensively about the issue I am facing and this thread seems to tbe the closest to my issue.
I have a Netgear R7000p Router + EAP245V3 AP.
Most wireless clients are connected to EAP245V3.
However, some clients will periodically timeout, (windows shows the exclamation mark) and then reconnect 1ish minute later.
These same clients connected to the R7000p directly will never behave this way.
I can also trigger this timeout on purpose by running a speed test on my client.
10 seconds into the speedtest, the client will lose internet connectivity. Only to regain it a minute later.
This leads me to believe that QoS might be the culprit here.
So I tried turning that off. BUT, as soon as I turn QoS 'off', the link rate displayed in Omada for the wifi clients drops to 54Mbps.
If I turn QoS 'on', I see link rates as high as 600Mbps.
I am on the latest FW. Wired clients seem to be rock solid.
Any help would be much appreciated.
- Copy Link
- Report Inappropriate Content
MFK wrote
So I tried turning that off. BUT, as soon as I turn QoS 'off', the link rate displayed in Omada for the wifi clients drops to 54Mbps.
If I turn QoS 'on', I see link rates as high as 600Mbps.
If you turn of WMM (QoS), the AP will use only 802.11b/g causing the WiFi speed to drop to 54 Mbps. To be able to use 802.11n you must leave WMM turned on. WMM is required for 802.11n by the WiFi standard, so that's normal behavoir.
As for loss of Internet (it's not a loss of the WiFi connection to the EAP when Windows shows an exclamation point) I don't have an idea what could be the cause, but I never experienced this with any EAP. First thing I would check if Internet fails is the connectivity from the client to the router by pinging the router's IP from the client machine. If this shows a broken connection, try to ping the EAP itself. If this also fails, then the WiFi connection dropped.
- Copy Link
- Report Inappropriate Content
Thank you for that clarification regarding QoS.
I had no idea!
But the time-outs are really bothering me though.
It will happen with any constant load.
If I'm downloading a steam game, or my Spotify library.
Like clockwork, every 2 minutes, the internet will be unavailable.
But will recover itself. The device will disconnect from the AP, and then reconnect a minute later.
I've been able to reproduce it across multiple devices:
Desktop with Linksys AE6000 Wifi USB adapter.
Surface Pro 3 with Marvel Wifi (I believe)
Mobile devices (such as iphone & pixel) are perfectly fine.
I can run as many speed tests as I want, with no timeouts.
Any suggestions would be much appreciated.
I am only using the 5ghz radio on the EAP245V3. I have the 2.4ghz disabled.
- Copy Link
- Report Inappropriate Content
MFK wrote
Like clockwork, every 2 minutes, the internet will be unavailable.
This (»Internet will be unavailable«) is way to unspecific for a description of what happens in your network.
As I wrote, check whether the clients can ping the EAP and can reach the router when they are not able to reach the Internet. You need to find out which device in your network causes this problem and only then one can give suggestions what could be the cause of clients not having access to the Internet.
Also keep in mind that a speed test will hog the router's resources and if you have only low bandwidth on the uplink it is not unusual that browsers run into a timeout (don't rely on browser's error messages, they are often mis-leading).
If clients are still connected to the WLAN and if both, the EAP and the router, are reachable during such a malfunction, the cause is neither the connection to the WLAN nor the connection to the router.
- Copy Link
- Report Inappropriate Content
Ok thank you for the direction.
I will investigate this weekend and get back to you.
Thank you for taking the time to respond.
For some reason, it never occurred to me to ping the AP or the router since my PC was connected to the network but just showing an exclamation point.
But I will run these tests this weekend and get back to you.
My connection is 500Mbps down and 25Mbps up through my ISP.
- Copy Link
- Report Inappropriate Content
Hi @MFK, I was wondering if you ever resolved this problem. I also have EAP245 with clients timing out.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4663
Replies: 19
Voters 0
No one has voted for it yet.