vpn but router can't ping other
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
vpn but router can't ping other
Model :
Hardware Version :
Firmware Version :
ISP :
I have an ipsec vpn connected between two routers but things behind each router can't see things on the other end, even by IP. One specific problem if anyone has an answer might solve the whole thing. Router A can't ping router B. I mean using the diagnostic ping in the router. Weird, huh?
Two new tl-er604w. Current HW & firmware.
Router A:
Behind a cable modem in dumb modem bridged mode.
LAN 192.168.5.0/24
Router B:
Behind dumb cable modem.
LAN 192.168.1.0/24
VPNs set as:
Using default settings for everything, IKE, IPsec.
IPsec policy Lan-to-Lan
Local subnet on A is 192.168.5.0/24. On B 192.168.1.0/24
Remote subnet on A is 192.168.1.0/24. On B 192.168.5.0/24
Everything else in both routers left at defaults.
Everything works fine internally on both ends.
From a PC behind B I can ping router A but can't get to anything else behind A even by IP.
From A I can't see anything behind B, or even ping router B from router A's diagnostic ping.
I just recently did the exact setup at another two sites and all worked as expected. As soon as the VPN connected all systems on one end could see all systems on the other end. But this pair of sites where I'm having the problem is just not working.
Ideas?
Thanks.
Hardware Version :
Firmware Version :
ISP :
I have an ipsec vpn connected between two routers but things behind each router can't see things on the other end, even by IP. One specific problem if anyone has an answer might solve the whole thing. Router A can't ping router B. I mean using the diagnostic ping in the router. Weird, huh?
Two new tl-er604w. Current HW & firmware.
Router A:
Behind a cable modem in dumb modem bridged mode.
LAN 192.168.5.0/24
Router B:
Behind dumb cable modem.
LAN 192.168.1.0/24
VPNs set as:
Using default settings for everything, IKE, IPsec.
IPsec policy Lan-to-Lan
Local subnet on A is 192.168.5.0/24. On B 192.168.1.0/24
Remote subnet on A is 192.168.1.0/24. On B 192.168.5.0/24
Everything else in both routers left at defaults.
Everything works fine internally on both ends.
From a PC behind B I can ping router A but can't get to anything else behind A even by IP.
From A I can't see anything behind B, or even ping router B from router A's diagnostic ping.
I just recently did the exact setup at another two sites and all worked as expected. As soon as the VPN connected all systems on one end could see all systems on the other end. But this pair of sites where I'm having the problem is just not working.
Ideas?
Thanks.