Using a cpe510 and eap110
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Using a cpe510 and eap110
Model : CPE510
Hardware Version : Not Clear
Firmware Version :
ISP :
I am wanting to set-up a point to point 5Ghz link with the cpe510 between 2 buildings. My main question is, once i have configured this setup can i add an eap110 to use the 2.4ghz range as a wireless access point on the building i am sending signal. was told this can be done as by using the point to point in 5ghz it does not get interference from the 2.4Ghz range.
Hardware Version : Not Clear
Firmware Version :
ISP :
I am wanting to set-up a point to point 5Ghz link with the cpe510 between 2 buildings. My main question is, once i have configured this setup can i add an eap110 to use the 2.4ghz range as a wireless access point on the building i am sending signal. was told this can be done as by using the point to point in 5ghz it does not get interference from the 2.4Ghz range.
