TL-ER6120 Configure VPN LAN-to-LAN with NO-IP account

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-ER6120 Configure VPN LAN-to-LAN with NO-IP account

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ER6120 Configure VPN LAN-to-LAN with NO-IP account
TL-ER6120 Configure VPN LAN-to-LAN with NO-IP account
2017-09-23 05:36:57 - last edited 2021-08-21 04:59:18
Model :

Hardware Version : TL-ER6120

Firmware Version : V1

ISP :

Hi everybody,

I have 2 Routers TL-ER6120 and I want to connect 2 LAN (Windows Server DC) with IPsec or L2TP/PPTP but by using NO-IP account, cause I haven't a fixe public IP address, I'm connecting to Internet with TP-Link modem Archer D5, connected to my router ER6120 in each LAN.

ER6120 is connect with with a static local IP to the modem wich is connected to Internet.

I followed the instruction in the tuto and I used the NO-IP domain like remote Gateway address, the No-IP domain is online but it don't work, any idea?

Thanks
  0      
  0      
#1
Options
3 Reply
Re:TL-ER6120 Configure VPN LAN-to-LAN with NO-IP account
2017-09-26 14:34:26 - last edited 2021-08-21 04:59:18

joe06 wrote

Model :

Hardware Version : TL-ER6120

Firmware Version : V1

ISP :

Hi everybody,

I have 2 Routers TL-ER6120 and I want to connect 2 LAN (Windows Server DC) with IPsec or L2TP/PPTP but by using NO-IP account, cause I haven't a fixe public IP address, I'm connecting to Internet with TP-Link modem Archer D5, connected to my router ER6120 in each LAN.

ER6120 is connect with with a static local IP to the modem wich is connected to Internet.

I followed the instruction in the tuto and I used the NO-IP domain like remote Gateway address, the No-IP domain is online but it don't work, any idea?

Thanks


Have you ever open the ports for your VPN server on the modem Archer D5? As I see, your VPN server is in a LAN, so it's needed to open some special ports(according to which kind of VPN you want to use.)
  0  
  0  
#2
Options
Re:TL-ER6120 Configure VPN LAN-to-LAN with NO-IP account
2017-09-27 17:59:29 - last edited 2021-08-21 04:59:18
Exactly, my VPN server is in a LAN, I added ports 500 UDP and 4500 UDP, but it don't work, I was obliged to return to the bridge mode in the model Archer D5, and connect with the VPN router for it to work, if I find another solution, I will post it here, otherwise I keep this config.
  0  
  0  
#3
Options
Re:TL-ER6120 Configure VPN LAN-to-LAN with NO-IP account
2017-09-28 16:20:09 - last edited 2021-08-21 04:59:18

joe06 wrote

Exactly, my VPN server is in a LAN, I added ports 500 UDP and 4500 UDP, but it don't work, I was obliged to return to the bridge mode in the model Archer D5, and connect with the VPN router for it to work, if I find another solution, I will post it here, otherwise I keep this config.

Maybe the configuration issue? http://www.tp-link.com/en/faq-380.html
You can double check the setting. Nothing else need to do I think to make it work.
  0  
  0  
#4
Options