Business Community > Switches > my computer cannot see my TL-SF1008P it's not plug and playing
< Switches

my computer cannot see my TL-SF1008P it's not plug and playing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

my computer cannot see my TL-SF1008P it's not plug and playing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
my computer cannot see my TL-SF1008P it's not plug and playing
my computer cannot see my TL-SF1008P it's not plug and playing
2017-09-16 22:49:43
Model :

Hardware Version :

Firmware Version :

ISP :

my computer cannot see my TL-SF1008P 8 port/4port POE switch.
I've tried everything I dont know what to do next.
I'm only trying to hook up 4 IQEye PoE Cameras
it's not plug in and playing
  0      
 
  0      
 
#1
Options
5 Reply
Re:my computer cannot see my TL-SF1008P it's not plug and playing
2017-09-18 08:58:09

aMikey wrote

Model :

Hardware Version :

Firmware Version :

ISP :

my computer cannot see my TL-SF1008P 8 port/4port POE switch.
I've tried everything I dont know what to do next.
I'm only trying to hook up 4 IQEye PoE Cameras
it's not plug in and playing


Hi aMikey, The TL-SF1008P only 4 ports support IEEE 802.3af, so please confirm that your IQEye PoE Camera be comply with IEEE 802.3af(not IEEE 802.3at),Certainly, you need connect them to port1-port4 in TL-SF1008P.
  0  
  0  
#2
Options
Re:my computer cannot see my TL-SF1008P it's not plug and playing
2017-09-20 10:08:52
thank You for your generic reply, DuH!! I guess you think I'm stupid. Well I fixed the issue myself without your help and I'm not telling you what I did
  0  
  0  
#3
Options
Re:my computer cannot see my TL-SF1008P it's not plug and playing
2017-09-20 21:25:20
To be honest, dear aMikey: complaining about a " computer cannot see my TL-SF1008P switch" with an unmanaged switch is not a very clear problem description. No computer can "see" unmanaged switches.

There is no reason to blame some other fellow user who just wanted to help you get things going.

And for not telling us your problem solution: Never mind. Most users don't have such problems with unmanaged switches.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#4
Options
Re:my computer cannot see my TL-SF1008P it's not plug and playing
2017-09-21 02:30:07
The problem was because I could not find the IP address to the device I installed, Solution was to install an IP finder. Problem solved
  0  
  0  
#5
Options
Re:my computer cannot see my TL-SF1008P it's not plug and playing
2017-09-21 03:27:09

aMikey wrote


The problem was because I could not find the IP address to the device I installed, Solution was to install an IP finder. Problem solved


Great you solved it.

Yes, the old DHCP problem. :cool: It's always best to assign static IPs to stationary devices which must be reachable from elsewhere. So you don't even need an IP finder.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1248

Replies: 5

Related Articles
 TL-SF1008P - freezes after a while
775 0
 TL-SF1008P and TL-POE10R
1031 0
 TL-SF1008P&TL-WA5210G POE
641 0
 R605 vpn cannot see other computers
1214 0
 TL-ER6020 make sure that a Mac computer can see a Fileserver
782 0
 TL-SF1008P Not Powering CISCO Phone
2602 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.