TP-Link Launches Tapo C420S2 2K QHD, Battery-Powered, Full-Color Night Vision, Indoor/Outdoor  

 

Official Press Release from TP-Link: Press Release 

 

Product Page: Tapo C420S2 Product Page 

 

 

The First Battery Powered Cameras for the Tapo Line have been released for the United States on November 16th! The Tapo C420S2 is our first wire-free camera that offers 2K crystal clear views, more flexible placement, and highly-optimized night vision experiences. 

 

 

Highlighted Features  

 

2K QHD x 20 fps Brings Crystal Views 

2K QHD (2560 × 1440px) provides noticeably sharper stream images than 1080P, with more subtle details. The 20-frame rate is supported for a clearer live-streaming experience.  

 

 

 

 

Wire-Free and Battery-Powered Design

 

Free from worries about degraded Wi-Fi signal or complex cabling. With a long-range low-power wireless protocol and powered by batteries, the cameras can be placed just about anywhere indoor or out. 

 

 

 

 

180-Day Battery Life*  Power Saving Mode  

Rechargeable battery that can last up to 3 months with the low-power protocol. 

Set the camera in to power-saving mode in Tapo APP when battery runs low.  

 

 

Full-Color Night Vision with a Starlight Sensor 

Reveal high-fidelity details and color at night with the starlight sensor. 

 

 

IP65 Water & Dust Resistant 

Offers excellent dustproof and good waterproof performance for outdoor scenarios. 

 

 

Smart Actions 

Note: 180-Day Battery Life* Battery life of up to 180 days is based on TP-Link’s laboratory testing triggering 10-20 events per day. Actual battery life may vary based on device settings, use, and environmental factors. 

 

Have you ever imagined using your camera as a motion sensor to turn on a porch light, now, doable camera Automation settings in the Tapo app. Learn more about Tapo Camera Smart Actions. 

 

 

Where to Buy 

The Tapo C420S2 Smart Wire-Free Security Camera System (2-Camera System) has an MSRP of $199.99 and is available through the TP-Link website and on Amazon. 

  

 

 

 

Frequently Asked Questions 

 

Q: How does a wire-free camera system connect to the router and transmit data? 

 

Tapo cameras work with a Tapo H200 hub that bridges the cameras and the router via Tapo’s Sub-GHz low-power wireless protocol. The hub is wired to the router via an Ethernet connection.   

 

  

 

Q: How do wire-free security cameras get power? 

 

Tapo C420s are powered by the included Tapo A100 batteries.  

 

Q: How many cameras can be connected to one Tapo H200 at most? 

 

Up to 4 cameras can be connected to one Tapo H200 hub.  

 

Q: How is Tapo wire-free camera different from the Tapo wireless cameras?  

 

The main difference is that Tapo wire-free camera system is powered by batteries without considering getting a nearby power outlet. 

The wire-free cameras do not support RTSP streaming to avoid quick battery drain. 

 

 

Installation and Configurations Videos:

 

Tapo C420S2 Installation and Mounting Video

 

Setting Up a Tapo Wire Free Camera

 

Resetting your Tapo C420 Camera

 

 

Advertised Features 

• 2K QHD-Now with 1.7 times more pixels than 1080p, providing clearer videos and photos. 

• 180-Day Battery Life*-The rechargeable and removable battery with a low-power protocol extends your usage. 

• Full-Color Night Vision-Reveal high-fidelity details and color at night with the starlight sensor. 

• Smart AI Detection and Notification-Smart AI identifies people, pets, and cars, notifying users as needed. 

• Wire-Free Placement-No wires means you can place the cameras almost anywhere inside or outside-whatever works for you! 

• Light and Sound Alarm-Triggers sound and light as an alarm when motion is detected. 

• Two-Way Audio-Enables communication through a built-in microphone and speaker. 

• Flexible Storage Choices-Save recorded videos on the hub-installed microSD card† (up to 256 GB) or by using Tapo Care cloud storage services** . 

• Water & Dust Resistant-Offers excellent waterproof and dustproof performance for outdoor scenarios.