Smart Home Community > All Threads > 3-way Switch
< All Threads

3-way Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

3-way Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
3-way Switch
3-way Switch
2020-11-23 18:29:51 - last edited 2020-12-01 01:42:00
Model: HS210  
Hardware Version:
Firmware Version:

I would like to purchase and install a 3-way switch (HS210) in my house.  I understand from reading Amazon reviews that I can install only one switch per 3-way circuit.  I have also read that it needs to be on the "load" side.  I'm not 100% sure what this means.  

 

Please see what I believe to be my setup after reviewing my wiring in the wall below:

 

Since the switch requires 2 travelers, 1 line/load, and 1 neutral wire I assume I have to install the switch on the left side, correct?

 

If so, will the HS210 work with my wiring configuration?

 

If it won't work, do you have any other suggestions for a smart switch for use in this type of set up?

 

Thanks in advance!

  0      
 
  0      
 
#1
Options
4 Reply
Re:3-way Switch
2020-12-01 00:32:57 - last edited 2020-12-01 01:42:00

@bhunt935 

 

The HS210 can be installed as just one per circuit though its not the load side it has to be on.  It needs to be on the live side the reason is although the circuit will shut off and on power needs to be constant to the WiFi Module in order to be able to control the product even when its off.  If you have it on the load side the manual switch would need to stay in a static "on" position.  

 

I hope that explains it a bit better. 

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  1  
  1  
#2
Options
Re:3-way Switch
2020-12-01 01:01:43

@Carl yes. Thank you!

 

I believe that means that I can install it in the left side of the diagram, correct?

  1  
  1  
#3
Options
Re:3-way Switch
2020-12-01 01:43:26

@bhunt935 

 

Based on that Diagram, yes that should be where it goes.  I personally have this type of setup but i had to install on the load side as my Live or line side is in my garage. so in that case the switch in the garage just stays in the On position.  

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  1  
  1  
#4
Options
Re:3-way Switch
2020-12-01 01:45:49
Cool, thanks. Both of mine are inside. I won’t need to leave the other switch in the on position, correct?
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 3360

Replies: 4

Related Articles
3 way Switch with Standard 3 way switch
535 0
3 way switch
615 0
3 Way Switch
1090 0
3 way switch
1106 0
3 way switch is not synced
820 0
3-way switch with dimmer
2028 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.