Smart Home Community > All Threads > Use smart switch solely to control smart plug?
< All Threads

Use smart switch solely to control smart plug?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Use smart switch solely to control smart plug?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Use smart switch solely to control smart plug?
Use smart switch solely to control smart plug?
2020-11-11 23:06:55
Model: HS200  
Hardware Version:
Firmware Version:

If I connect an HS200 smart switch to hot and neutral, and do not connect anything to load, can I use the switch solely to control a Kasa smart plug (i.e. HS103)?

 

Is it possible to configure a HS210 3-way smart switch, with a standard (non-smart) 3-way switch, so that both switches will control a smart plug (again, no load wired into either switch)?

  0      
 
  0      
 
#1
Options
1 Reply
Re:Use smart switch solely to control smart plug?
2020-11-12 15:46:02

@Altairus 

 

To control the smart plug you wouldn't need to modify any wiring. You would install them as you normally would and set up smart actions: https://www.tp-link.com/us/support/faq/2567/

 

You smart action would be "control with switch".

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 799

Replies: 1

Related Articles
use 2 smart phones to control smart plug
1341 0
Want to use a Smart Switch to control a Switched Outlet
2601 0
How to use Smart Bulbs with a Smart Switch?
5817 2
Smart Plug for Outdoor Use
924 0
Use energy use monitoring in smart plug to trigger smart action
297 0
Smart plug use in 220 volts
580 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.