Smart plugs will not connect to new router
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Smart plugs will not connect to new router
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
We had to switch routers and now I can't connect smart plugs to new netgear c6300 v2 router. I have tried a variety of ways nothing works. When it tries to connect, it will not find the network. Also the WiFi network disappears and I have to unplug router to reset it to connect phones back to WiFi. Please help
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Unless the router is blocking the plug from connecting there is no reason why it should not work. You would just need to hard reset it first. Have you done that? Also have you contacted Netgear to see if there is any known compatiblity concerns between the two products?
- Copy Link
- Report Inappropriate Content
@Carl yes I've hard reset. I've contacted tp link and there are no compatibility issues. I've tried all their options. Still nothing
- Copy Link
- Report Inappropriate Content
Did you mean you contacted Netgear and there are no compatiblity issues and that you tried all of their options? I ask because we are TP-Link and I can say we don't know of any compatiblity issues but since we did not make the router hardware we can't say for certain. These plugs are just wireless 2.4GHz devices and they should work.
One thing you can try is turning on the router's guest network 2.4GHz and see if the plug will connect. This way you can rule out the routers network settings on your main channels.
- Copy Link
- Report Inappropriate Content
@Carl yes I chatted with a technician he literally gave up after we tried all of his tricks. He said and I quote. I don't know what else I can try, sorry. I now have 5 paperbweigh
- Copy Link
- Report Inappropriate Content
Wow they just gave up? All I can say is I am glad is wasn't one of my agents. Did you try the Guest network suggestion I provided?
- Copy Link
- Report Inappropriate Content
@Carl I never did get the plugs to work. Purchased a different brand to see if was my new router or plug issue. New plugs connected perfectly first time. All five of them.
- Copy Link
- Report Inappropriate Content
That is werid. If you still have our product i'd like to get our system team to look into it. Especially since another brand did work. If you can please send me your contact info to ussupportteam@tp-link.com or just let me know if we can use the email you used for your account here. If also returned the TP-Link products let me know that as well.
- Copy Link
- Report Inappropriate Content
Hi Thanks for the info. I have sent this to my system engieering team. In the mean time try this as a test. Try to enable your 2.4GHz guest network and try to connect the plugs to that. See if that works. Make sure to use WPA2 as the encryption type.
- Copy Link
- Report Inappropriate Content
@Carl yes I tried that same result
- Copy Link
- Report Inappropriate Content
Hi Presto,
So our engineering team responded it appears there is a compatiblity issue with in certain Netgear routers. Netgear AX3000; Nighthawk AX4: RAX40; Nighthawk RAX35 These routers will allow the Kasa Products to connect but then stops sending the beacon, meaning it stops broadcasting the SSID resulting in the devices losing connection. In our testing other Netgear will work like they should. The only thing we can say is if you have one of these listed netgear routers is to contact Netgear and report the issue.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 10047
Replies: 14
Voters 0
No one has voted for it yet.