HS220 not working
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
so my old switch had 4 wires in it and a ground.
1 white, 1 copper, 3 black
the switch is powering on, connected to wifi but the 4 bulb ceiling fan only one is working and it just flickering and wont dim or anything, not even turn off.
i have black wires in line and 1 in line, the white and ground are where they should be.
anyone know what i should do here?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@prestont it seems my bulbs are the culprit as of right now. a few of the LED's came on but would barely light up. they do not say they are NOT for dimmable and dont say they ARE so gonna try some dimmable ones.
- Copy Link
- Report Inappropriate Content
still nothing. bought new bulbs and now absolutely nothing.
- Copy Link
- Report Inappropriate Content
@prestont im really confused now.
this is for a 4 bulb ceiling fan that has 2 room switches. i replaced the switch that only has the light control on it. so the other switch is still normal.
the bulbs only come on if there is only one plugged in. if i put in any more than 1 bulb, none work. it acts like it doesnt have enough power to run them all. when a bulb does come on, its very dim even at full brightness. wifi is connected fine. i've switched the wires in every way possible but it still won't work.
i am at a total loss as to what to do here. please help.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@prestont tech support informed me they do not make a light switch capable of running more than one light. so this thing is completely useless to me. ALL my fixtures have more than one light per light switch.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1468
Replies: 5
Voters 0
No one has voted for it yet.