This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I recently installed four HS103 plugs in my house to control lamps. Two floor lamps in the living room and two wall sconces in the bedroom.
For the past few days they have been turning off and on in sequence. Lamp 1 click off, click on; lamp 2 click off, click on.
Any idea what is going on?
Make sure no schedules or modes were enabled. For one of the plugs do a complete factory reset by holding the side button for 15 seconds. See if that resolves it if so, do the rest of the plugs.
When the issue would happen do the LED lights change?
I have the same issue. I had the plugs replaced under warranty and the new kit plugs do the same thing. I have an older HS103 non-kit smart plug that does not switch off/on. There is something wrong with the plug design or software.
See my other post. The off/on switch occurs randomly (an hour or so give or take) apart and very quickly. Since I don't know when it will occur and happens so quickly, I don't have time to look over at the plug.
It can turn off if there is a slight loss in power it can cause the plug to act odd.
If there are no other programs controlling it I would reach out to support so they can work with you in reviewing the smart plug activity.
Helpful: 0
Views: 1026
Replies: 4
No one has voted for it yet.
We use cookies and browser activity to improve your experience, personalize content and ads, and analyze how our sites are used. For more details, please read our Privacy Policy.
