@jvk-of-md 

Schedules that are configured for our smart devices are actually saved locally. So if you set a switch to turn on at 6 am, and destroy your router the switch will still follow that schedule.

I appreciate an attempt to answer, however your reply has absolutely nothing to do with my question!

I have a similar issue. Every now and then my network connection will be lost when my service provider has some type of issue. When the service comes back online all my other devices reconnect automatically with exception of the HS200. That one displays a red wifi "fan" on the face of the switch and I can't reach it via the app anymore. My only recourse is to go outside and turn off the circuit breaker associated with the line powering the switch, waiting about 30 seconds, then turning the breaker back on. Only then will the HS200 reconnect with the network and start to function properly. Manually I can activate the switch just fine. Just not through the network with the app. How do I get it to reboot itself after the service outtage and reconnect?

@Merlin51 I have exactly the same problem. As for the "local" storage of programs, one of my switches did not turn off, so I'm not sure that's true. Anyway super annoying. Other smart devices that I use from TouchSmart and Insteon have never had a problem reconnecting. 

@jvk-of-md I think the issue is the switch times out after so long a time while trying to initially reconnect to the network. I suspect it is because the router hasn't had enough time to reboot and reinitialize the network before the switch timeout. They probably should reprogram these switches to try to reconnect again after so many minutes to take into account this possibility.