Smart Home Community > All Threads > Not Smart Enough
< All Threads

Not Smart Enough

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Not Smart Enough

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Not Smart Enough
Not Smart Enough
2017-11-05 02:04:37
Model : HS200

Hardware Version :

Firmware Version :

ISP :

Had 7 new wall switches installed last week. None are being discovered by phone or Alexa. Most are showing up as TP-Link Smart Switch in my internet but none will connect. Had one prior that works fine. Also have wemo plugs, working fine. All blinking green/amber. Have reset switch (lower right) and then reset lower left for factory on 2 of them, hoping that would fix things. doesn't. Keep getting 'not connected to internet' msg. Router is Netgear 6700, phone is Samsung 7, Am using windows 7 on laptop, my wi-fi on phone shows lots of smart switches but shows 'internet not available'.
I stand next to the switch with my phone and it never waivers, won't discover.
help?
  0      
 
  0      
 
#1
Options
7 Reply
Re:Not Smart Enough
2017-11-06 09:39:11
Smart plug can't provide internet, so it is normal when you see "internet not available".
Following the steps below, it should be working:
http://www.tp-link.com/us/faq-1247.html
  0  
  0  
#2
Options
Re:Not Smart Enough
2017-11-07 00:55:50
last night all 7 appeared in my wifi signal and one by one they connected.
Realizing the only way to find the 'numbers' per unit was to remove them from the wall to look at the 'back' of them prompts me to suggest those numbers be included in the packaging instead. At least it's finally done and I'm grateful.
  0  
  0  
#3
Options
Re:Not Smart Enough
2017-11-08 08:49:03
Do you mean the wireless name of the plugs or the model number?
The model number can be found on both the device and packaging.
If you install them one by one, the wireless name of the plugs will not affect the configuration.
  0  
  0  
#4
Options
Re:Not Smart Enough
2017-11-09 00:36:46

Shield101 wrote

Do you mean the wireless name of the plugs or the model number?
The model number can be found on both the device and packaging.
If you install them one by one, the wireless name of the plugs will not affect the configuration.


Where on the package? I looked, neighbor looked, electrician looked. Numbers were mostly the same. I'd love to know that before I ever install more. thx! I'm referring to the specific number of the specific appliance which I read is on the BACK of the plug (device) itself. By then, they were all in the wall.
  0  
  0  
#5
Options
Re:Not Smart Enough
2017-11-13 16:42:31
The digits in the wifi name for the product is the last 4 characters of the MAC address, do you see MAC address at the label on the box? But you still need to check the label on the unit to know which one has that MAC address.
  0  
  0  
#6
Options
Re:Not Smart Enough
2017-11-14 02:58:48
I’ve been known to configure mine, then turn it on/off to see where it ended up. "Oh, that must be the hall light."
  0  
  0  
#7
Options
Re:Not Smart Enough
2017-11-14 16:19:07
i had this problem too
solved by change my port :(
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 754

Replies: 7

Related Articles
HS220 switch do not dim enough
434 2
TAPO S505D not dimming low enough
444 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.