@RyanJW 

Rename the nickname to something involving light so Linving Room Light Strip in Kasa. Now re-associate Kasa back into Google by disabling the service then enabling it again.

@Tony 

I have 3x LED strips. All LED strips are exhibiting the same issues with Google Home integration.  

Unlinked the TP-Link Kasa App from GH and still no success. All devices are labeled correctly and GH recognised them as lights/lamps in my home environment.

1) I'm still unable to use voice via GH to switch off or on the LED strip.

2) My GH Hub's are also unable to switch off or on the LED strip via the touch interface. 

3) My GH app on iOS (iPhone iOS13) is also unable to switch off or on the LED strip

I'm only able to use the Kasa app or "Set lights to 0%" to switch it off or "Set lights to 100%" to switch it on.

Sounds like a bug to me...

@RyanJW 

Thank you for the information.

I mentioned your issue to our testers to see if they see the same thing.

I will follow up once I get more information from them.

@sfm42 

@Gmarv09 

For other people who have the KL430 and Google Hub, are you guys seeing the same thing?

@Tony the only voice integration we use in our smart home is Alexa with Echo dots in each room. We have 36 plugs/switches/light strips, ect from tp-link

Tony wrote

@RyanJW 

 

Thank you for the information.

 

I mentioned your issue to our testers to see if they see the same thing.

 

I will follow up once I get more information from them.

 

@sfm42 

@Gmarv09 

For other people who have the KL430 and Google Hub, are you guys seeing the same thing?

and never experience these issues. 

100% of the time all devices respond to commands from each family member. 

Fingers crossed Google can get things fixed up for you

@Tony 

I only use Alexa devices and have had 0 issues.

The only issue remaining for me is that the light strips are not detected in the tp-link deco app. This means I can't link it yet with my home automation motion or door sensors.

@Gmarv09 hmm it comes up in my Deco app. Turn the strip on and then go into the app and see if it appears 

@sfm42 

Yes it shows as a network device. However if I go to add it as a trigger or an action it is not listed.

@Gmarv09 

The light strip(for me) only shows up as a Network Device under automation. It's not listed as lights or switches /plugs/outlets. I created a routine this way. 

@sfm42 

Is the routine able to turn it on via a sensor? Doing it like that only lets me change it's network priority but not actually turn it on/off.

Thank you guys for the feedback.

@RyanJW 

Still looking to see what we can find. It might be worth getting in touch with Google as well to see if they might have anything.

@Gmarv09 

@sfm42 

I'm also looking into the KL430 and the Home Automation in the Deco M9 app.