Hey @mshens,

If your bulbs did not blink after the reset attempt, then the bulb did not reset.

There is a slight delay that must be given in between switches to allow the device to power on before being switched off again - so it may take a few attempts.

If the device is attached to a fixture with its own control, you may try using the fixtures power shutoff as it is typically more sudden than the shutoff over your wiring.

Once the device is reset, either with a hard or a soft reset, you will be able to re-add the devices in the Kasa App for your new network. (Soft Reset(5x) = Network Settings Only, Hard Reset(10x)= Factory Defaults)

Lastly, I would recommend possibly reinstalling the Kasa App if it appears that your phone is having difficulty seeing a device on the network that has been reset or is indicating that it is ready for setup.It is possible that there is a missing permission (such as Local Device Discovery) that may be preventing the device from being seen.