TL-WR1043ND V1.11 Slow wired connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WR1043ND V1.11 Slow wired connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WR1043ND V1.11 Slow wired connection
TL-WR1043ND V1.11 Slow wired connection
2020-06-15 21:50:24 - last edited 2020-06-15 21:51:26
Model: TL-WR1043N  
Hardware Version: V1
Firmware Version: 3.13.15 Build 140319 Rel.41339n

So I recently upgraded my internet to 200/20 from 25/5 and now I have a problem.  

When I connect my PC through my TL-WR1043ND I only get about 130Mbit download on Speedtest. I tried plugging it directly into the ISP's modem and I get full 200Mbit.  

I bought new CAT6 cables (modem-router, router-PC), updated the firmware, made sure bandwidth control is off, tried different ports and I always get the same result, 130Mbit on speedtest.  

 

Windows is also reporting link speed of 1.0Gbps. I feel like I've tried everything in my knowledge and can't find a fix, so I'm turning to you guys on here for help.  

I would love to keep using this router, because the extra ports come in handy and the WiFi signal is stronger on this than the ISP modem. 

 

Any help would be greatly appreciated.  

 

EDIT: I selected TL-WR1043N instead of ND, because for whatever reason ND model isn't on the dropdown list.

  0      
  0      
#1
Options
3 Reply
Re:TL-WR1043ND V1.11 Slow wired connection
2020-06-16 21:02:20

@JumpingMonkey 

 

Do you happen to have another PC to wire or use a different device to test the speeds? Mainly to see if the issue is happening across all devices or just this PC.

 

Another setting you could look at in the router is located in the NAT menu. Make sure "Current Hardware NAT Status" is not disabled. If it is already enabled, disable it, save then enable it again and test.

  0  
  0  
#2
Options
Re:TL-WR1043ND V1.11 Slow wired connection
2020-06-16 21:47:44 - last edited 2020-06-16 21:48:28

I don't have another PC to test, but my PS4 is reporting ~90Mbit.  

Plugged straight into the ISP modem it's normal ~200Mbit.  

 

I tried looking, but I can't seem to find NAT settings on my router. I searched my issue and people were saying to disable some NAT settings, but I can't for the life of me find ANY NAT setting in this router. 

 

Also, if this helps, my PS4 is reporting NAT as "Type 2"

  0  
  0  
#3
Options
Re:TL-WR1043ND V1.11 Slow wired connection
2020-06-17 18:01:07 - last edited 2020-06-17 18:02:53

@JumpingMonkey 

 

Your router is a v1, the NAT boost seems to be only on the v3.

 

You could try opening ports to see if that may help with the speeds. Type 2 is the gaming system saying not all ports it uses are opened for communication.

 

Go to virtual servers, add a new entry, enter the port the gaming system uses. The IP address is the IP of the gaming system, protocol leave on "All", and do not touch the common service port.

 

Here are the ports the PS4 uses:

 

Port 80 (TCP), Port 443 (TCP), Port 1935 (TCP), Port 3478-3480 (TCP), Port 3478-3479 (UDP)

  0  
  0  
#4
Options