High Latency and Packet Loss on TP-Link Tapo C200

High Latency and Packet Loss on TP-Link Tapo C200

High Latency and Packet Loss on TP-Link Tapo C200
High Latency and Packet Loss on TP-Link Tapo C200
6 hours ago
Model: Tapo C200  
Hardware Version:
Firmware Version: 1.4.1

I'm experiencing intermittent network issues with a TP-Link Tapo C200 IP camera. The device works fine for a few hours but then starts exhibiting severe latency and packet loss, as shown in the following ping example:

Request timeout for icmp_seq 559
Request timeout for icmp_seq 560
64 bytes from 10.0.11.82: icmp_seq=557 ttl=64 time=4262.997 ms
64 bytes from 10.0.11.82: icmp_seq=558 ttl=64 time=3602.675 ms
64 bytes from 10.0.11.82: icmp_seq=560 ttl=64 time=2026.528 ms
Request timeout for icmp_seq 564
Request timeout for icmp_seq 565
Request timeout for icmp_seq 566
Request timeout for icmp_seq 567
Request timeout for icmp_seq 568
64 bytes from 10.0.11.82: icmp_seq=565 ttl=64 time=4585.926 ms
Request timeout for icmp_seq 570
Request timeout for icmp_seq 571
64 bytes from 10.0.11.82: icmp_seq=567 ttl=64 time=5409.015 ms
Request timeout for icmp_seq 573
Request timeout for icmp_seq 574
Request timeout for icmp_seq 575
64 bytes from 10.0.11.82: icmp_seq=569 ttl=64 time=7736.727 ms
Request timeout for icmp_seq 577
Request timeout for icmp_seq 578
Request timeout for icmp_seq 579

 

Then it starts to work again by itself. The camera is connected via Wi-Fi 11 - 2.4 GHz with fixed ip, and the issue persists despite restarting the device and checking the network. 

Could you please assist in diagnosing and resolving this behavior?

Thank you in advance.

  1      
  1      
#1
Options
1 Reply
Re:High Latency and Packet Loss on TP-Link Tapo C200
6 hours ago

example of last 6 hours. Signal -54 dBm

  0  
  0  
#2
Options