KC401 - Cameras stop recording or problems viewing them when sd card nears the full mark
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.KC401 - Cameras stop recording or problems viewing them when sd card nears the full mark
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have four KC401 cameras. All are equipped with San Disk Max Endurance 32 gb sd cards. I seem to be having various problems with all cameras when they get close to being full (when only a small remaining memory amount is shown in red). It seems like the cameras are encountering problems when they have to initiate an overwrite of existing videos. When this happens, I am either left with a spinning circle when trying to view the latest videos or I can see that videos were recorded but the camera says no recordings are available. In every case, reformatting the sd card always fixes the issue. However, this results in the loss of an unknown amount of un-viewed recordings. Any chance this could be fixed via a firmware update? A fix would be greatly appreciated. Thank you.
moto
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @KVK
Thank you for the feedback.May I know the model number of your smart camera? To look into the case further, can you help confirm case details requested above on #2 of this thread, this is really important for us to locate the cause of the issue and try to fix it asap, thank you very much!
- Copy Link
- Report Inappropriate Content
Well, I just received a request from TP-Link support to install debugging firmware in all four of my KC-401 cameras and I am respectfully declining to do that because it sounds like this debugging firmware is designed to primarily catch SD card malfunctions instead of focusing on the current camera firmware and hardware version. With that said, I will just test my SD cards (when my new card reader is delivered). If they are defective, I will replace them. If they are not defective, I will reformat as needed.
Unfortunately, I am not alone. Many are complaining about similar things like:
Can't view recording due to an infinite spinning circle/arrow
Thumbnail present but camera says no recordings available
Camera recording is degrading over time.
Camera stopped recording. Had to reformat the SD card
etc, etc
These similar reports are coming form owners with several different camera models, equipped with various model SD cards and sizes.
Thanks for your time.
- Copy Link
- Report Inappropriate Content
I am the original author of this thread and I thought I would give some feedback on my original issue. So, I did test all 4 camera cards and they all passed the recommended testing. Now, I have not had a single "stopped recording" issue for over a month now. The cameras have continued to work through thunderstorms and minor power hits while still on firmware version 2.3.13. So, I have no idea what changed? Maybe support changed something upstream? Anyway, I updated to firmware version 2.3.14 without any issues so I am hoping my good luck will continue.
moto
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1810
Replies: 13
Voters 0
No one has voted for it yet.