Official Release Deco X50-5G 1.1.5 with Bridge Mode and Cell Lock
This Article Applied to
Deco X50-5G_V1
Firmware Download Link:
Deco X50-5G_V1_1.1.5_Build_20240419
Modifications and Bug Fixes:
1. Add Bridge Mode.
2. Support Cell Lock.
3. Support displaying more connection details about 4G/5G signal status, like Cell ID/PCI/ARFCN.
4. Fixed the issue that SMS cannot be sent properly in some areas.
5. Enhanced network stability.
Note:
1. The current network configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
2. Please make sure the Deco APP is up-to-date.
FAQs
Q1: How to use Cell Lock on the Deco X50-5G?
Sometimes Deco X50-5G might be switching between different Band combinations, Cell Lock helps to manually set Deco X50-5G to the desired band combination to improve the network speed and stability.
Cell Lock is supported for 4G and 5G respectively. It is under Deco APP>More>Internet>Cell Lock.
To enable it, you need to enter ARFCN (EARFCN for 4G and NRARFCN for 5G) and the corresponding PCI of the desired LTE/5G Cell, which can be found under Deco APP>More>Internet.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Can this version be installed on x50-5G ver. 120? If not, when to wait similar update for v1.20?
- Copy Link
- Report Inappropriate Content
@David-TP Amazing and great performance. so I'm from Saudi Arabia and have bought the x50-5G and i love the options and details in the software. So intuitive and easy to figure out however, there are a few things that I wanna point out one feature that I found to be missing from this device that are available in the rival devices. This is the DMZ settings. secondly I don't know why but whenever I do a speed test, I get 10 to 12 ms ping or latency. however, in the PlayStation five I get a significantly higher ping that hovers around 28 to 30ms. using RJ45 as well ! those are the two things that I wish I can find a solution to or a reply.
Sincerely,,,
Abdullah Ashour.
- Copy Link
- Report Inappropriate Content
Bonjour je suis au Portugal j'ai commandé une antenne kaser spéciale 5 g et spécial N78 j'ai essayé de me brancher dessus mais impossible d'avoir les informations besoin pour configurer la cell lock et quand je choisi dans la liste normal la N78 elle saute et bascule en 3 G carrément j'ai vérifié que je ne sais comment elle va chercher la 5G sur les bandes B je précise que je suis au Portugal et j'utilise une sim Vodafone 5 G mon débit max est de 50 Mbit, j'attends une antenne demain qui fasse les fréquences B et N pouvez vous le conseiller comment me bloquer sur N78 au Portugal chez Vodafone ou alors comment j'ai la 5 g sur les bandes B merci d avance pour votre réponse et attention j'aimerais beaucoup me bloquer sur la 5 G uniquement
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Can i get the info about when this version with Cell lock will be available for HW version 1.20/EU?
- Copy Link
- Report Inappropriate Content
@Adya le problème se pose plus j'ai acheté le déco x80 5 G et lui se branche a la fois sur le 4G et a la fois sur le 5 G donc ce que je ne savais pas c'est que les cartes sim internet illimité avec écrit 5 g en grand sa veut pas dire on a le débit 5 G personnellement j'ai changé trois fois d'équipements et des fois atteint 60mbit mais c'est un miracle car Vodafone et ses concurrents au Portugal mettent la carte illimité brider a 40 Mbit de débit pourtant avec 5 G écrit en grand et nul part renseigner la vitesse donc avec mon déco x50 5 G j'étais déjà très bien et mon antenne kaser omnidirectionnel
- Copy Link
- Report Inappropriate Content
Cell Lock ability was released in May this year for x50-5G version 1. Is it normal that today end of August people ith other hardware versions, like me witn 1.20EU, still have to wait for this ooportunity in firmware release?
TP-LINK manufactures these HW versions like a pancakes, without giving any possibility to select HW version during buying process and then monthes providing Zero support for users with problems.
I experience frequent Cell changing in my location and need this feature to improve my internet connection.
Can You at least provide us with info, when such release can be expected for 1.20EU?
If not at all, how can i exchange my unit to version 1.0?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 8613
Replies: 43
Voters 0
No one has voted for it yet.