Archer AX73 V1 with EasyMesh, random reboots
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
My archer ax73 is randomly rebooting. This has been happening for the last 2/3 months (I don't have a specific date in time, but I am sure that before september 2023, I didn't have any problem). It seems that this problem is commong (see this thread: https://community.tp-link.com/en/home/forum/topic/633288?replyId=1274442)
I got my archer ax73 V1 in June 2021 and I also have 2 repeaters that I use for their ethernet ports, all configured with EasyMesh (before OneMesh):
* A RE605X V2 since June 2022, on the latest firmware version: 1.0.3 Build 20230907
* A RE700X V1 since July 2023, on the latest firmware version: 1.1.4 Build 20230509
One thing that is surprising is that when this happens, all clients are disconnected all at once. But the WIFI stays ON. However, checking the logs of the router I can see that it performed a regular reboot. The last reboot happened yesterday afternoon. The next time this happens I'll check I see the lights of the router goes from-> OFF to ON.
All wired clients get disconnected as well and the router web UI page is completely unaccessible when this happens. An then a minute or so later, everything goes back to normal.
Finally, I suspect this is happening when a lot of connections are opened with my router. I host a game server with 2 UDP ports open on the internet (with static IP from my ISP) and it seems (finger in the air, I don't have actual proof for this) that reboots are more frequent when several players are connected to my home server.
Please can something be done to fix this problem? Thanks in advance.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi All,
If anyone has similar issue, please refer to the workaround provided in this thread: Archer AX73 V1&V2 might reboot automatically when working together with some Range Extenders
- Copy Link
- Report Inappropriate Content
Hello
I have same problem with ax73 eu version 1. I have three RE705x in easymesh.
I think if ax73 has client more than 30 clients. It will trigger random reboot only on ax73. All RE705x stay online.
Thank you.
- Copy Link
- Report Inappropriate Content
A random just happened now (at 19h36, see the logs below). I checked the router and I could see the LED light blinking (litteraly like a regular reboot).
The game server I mentionned in my original post wasn't running and there were not particular heavy usage of my network/internet.
Please find the latest logs here:
####################################################################
# Archer AX73 System Log
# Time = 2023-12-04 19:39:03
# H-Ver = 1.0.0 ; S-Ver = 1.3.5 Build 20230919 rel.12938
# LAN: I = 192.168.1.1 ; M = 255.255.255.0 ; MAC = C0:06:C3:45:72:5C
# WAN: W = dhcp ; I = XXX.XXX.XXX.XXX ; M = 255.255.255.248 ; MAC = C0:06:C3:45:72:5D
# G = XXX.XXX.XXX.XXX ; D1 = 188.172.144.120 ; D2 = 141.0.144.64
# Clients connected: 9 ; WI-FI : 6
####################################################################
2023-12-04 19:37:28 led-controller[1180]: <6> 288051 Start to run WAN1_ON
2023-12-04 19:37:28 led-controller[1180]: <6> 288051 Start to run WAN0_OFF
2023-12-04 19:37:28 led-controller[1180]: <6> 288051 Start to run LAN_ON
2023-12-04 19:37:19 led-controller[1180]: <6> 288051 Start to run WAN1_ON
2023-12-04 19:37:19 led-controller[1180]: <6> 288051 Start to run WAN0_OFF
2023-12-04 19:37:19 led-controller[1180]: <6> 288051 Start to run LAN_ON
2023-12-04 19:36:50 upnp[13710]: <6> 217504 Service start
2023-12-04 19:36:50 upnp[13710]: <6> 217505 Service stop
2023-12-04 19:36:47 remote-management[13194]: <6> 282505 Service stop
2023-12-04 19:36:37 nat[11255]: <6> 211021 IPSEC ALG enabled
2023-12-04 19:36:37 nat[11255]: <6> 211021 L2TP ALG enabled
2023-12-04 19:36:37 nat[11255]: <6> 211021 PPTP ALG enabled
2023-12-04 19:36:37 nat[11255]: <6> 211021 SIP ALG enabled
2023-12-04 19:36:37 nat[11255]: <6> 211021 RTSP ALG enabled
2023-12-04 19:36:37 nat[11255]: <6> 211021 H323 ALG enabled
2023-12-04 19:36:37 nat[11255]: <6> 211021 TFTP ALG enabled
2023-12-04 19:36:37 nat[11255]: <6> 211021 FTP ALG enabled
2023-12-04 19:36:37 nat[11255]: <5> 211054 Virtual server created succeeded[ex-port:51820 ip:192.168.1.250 in-port:51820 protocol:udp]
2023-12-04 19:36:36 nat[11255]: <5> 211054 Virtual server created succeeded[ex-port:2456 ip:192.168.1.250 in-port:2456 protocol:udp]
2023-12-04 19:36:36 nat[11255]: <5> 211054 Virtual server created succeeded[ex-port:2457 ip:192.168.1.250 in-port:2457 protocol:udp]
2023-12-04 19:36:33 nat[11255]: <6> 211501 Initialization succeeded
2023-09-19 00:00:49 nat[11255]: <6> 211501 Initialization succeeded
2023-09-19 00:00:47 led-controller[1180]: <6> 288051 Start to run WAN1_OFF
2023-09-19 00:00:47 led-controller[1180]: <6> 288051 Start to run WAN0_ON
2023-09-19 00:00:47 led-controller[1180]: <6> 288051 Start to run LAN_ON
2023-09-19 00:00:45 led-controller[1180]: <6> 288051 Start to run STATUS_ON
2023-09-19 00:00:44 qos[10757]: <6> 259504 Service start
2023-09-19 00:00:44 qos[10757]: <6> 259503 Function disabled
2023-09-19 00:00:43 led-controller[1180]: <6> 288051 Start to run GENERAL
2023-09-19 00:00:37 traffic-stats[8910]: <6> 269504 Service start
2023-09-19 00:00:30 factory-reset[7760]: <6> 284504 Service start
2023-09-19 00:00:28 parental-control[7042]: <6> 229504 Service start
2023-09-19 00:00:28 parental-control[7042]: <6> 229502 Function enabled
2023-09-19 00:00:26 access-control[6873]: <6> 239504 Service start
2023-09-19 00:00:26 access-control[6873]: <6> 239503 Function disabled
2023-09-19 00:00:23 nat[6153]: <7> 211001 Flush conntrack
2023-09-19 00:00:23 nat[6153]: <6> 211502 Function enabled
2023-09-19 00:00:23 nat[6153]: <5> 211051 Create NAT chain succeeded
2023-09-19 00:00:22 nat[6153]: <6> 211501 Initialization succeeded
2023-09-19 00:00:21 nat[6153]: <6> 211501 Initialization succeeded
2023-09-19 00:00:20 basic-security[5575]: <6> 219504 Service start
2023-09-19 00:00:20 basic-security[5575]: <5> 219606 Flush conntrack table succeeded
2023-09-19 00:00:18 imb[5644]: <6> 218507 Daemon connection succeeded
2023-09-19 00:00:18 imb[5644]: <6> 218012 ARP Binding disabled
2023-09-19 00:00:18 imb[5644]: <6> 218506 Config interface initialization succeeded
2023-09-19 00:00:18 imb[5644]: <6> 218501 Initialization succeeded
2023-09-19 00:00:17 firewall[4415]: <6> 209504 Service start
2023-09-19 00:00:17 upnp[5403]: <6> 217504 Service start
2023-09-19 00:00:16 upnp[5403]: <6> 217505 Service stop
2023-09-19 00:00:15 led-controller[1180]: <3> 288753 Config importing failed
2023-09-19 00:00:15 led-controller[1180]: <7> 288009 Failed to read _ON
2023-09-19 00:00:13 led-controller[1180]: <3> 288753 Config importing failed
2023-09-19 00:00:13 led-controller[1180]: <7> 288009 Failed to read _ON
2023-09-19 00:00:13 remote-management[4648]: <6> 282505 Service stop
2023-09-19 00:00:12 led-controller[1180]: <3> 288753 Config importing failed
2023-09-19 00:00:12 led-controller[1180]: <7> 288009 Failed to read _ON
2023-09-19 00:00:11 led-controller[1180]: <6> 288051 Start to run WIFI2G_ON
2023-09-19 00:00:11 led-controller[1180]: <6> 288051 Start to run WIFI5G_ON
2023-09-19 00:00:11 led-controller[1180]: <3> 288753 Config importing failed
2023-09-19 00:00:11 led-controller[1180]: <7> 288009 Failed to read _ON
2023-09-19 00:00:11 led-controller[1180]: <3> 288753 Config importing failed
2023-09-19 00:00:11 led-controller[1180]: <7> 288009 Failed to read _ON
2023-09-19 00:00:10 led-controller[1180]: <3> 288753 Config importing failed
2023-09-19 00:00:10 led-controller[1180]: <7> 288009 Failed to read _ON
2023-09-19 00:00:10 led-controller[1180]: <3> 288753 Config importing failed
2023-09-19 00:00:10 led-controller[1180]: <7> 288009 Failed to read _ON
2023-09-19 00:00:09 led-controller[1180]: <3> 288753 Config importing failed
2023-09-19 00:00:09 led-controller[1180]: <7> 288009 Failed to read _ON
2023-09-19 00:00:09 led-controller[1180]: <3> 288753 Config importing failed
2023-09-19 00:00:09 led-controller[1180]: <7> 288009 Failed to read _ON
2023-09-19 00:00:08 led-controller[1180]: <3> 288753 Config importing failed
2023-09-19 00:00:08 led-controller[1180]: <7> 288009 Failed to read _ON
2023-09-19 00:00:08 led-controller[1180]: <3> 288753 Config importing failed
2023-09-19 00:00:08 led-controller[1180]: <7> 288009 Failed to read _ON
2023-09-19 00:00:07 led-controller[1180]: <3> 288753 Config importing failed
2023-09-19 00:00:07 led-controller[1180]: <7> 288009 Failed to read _ON
2023-09-19 00:00:07 led-controller[1180]: <3> 288753 Config importing failed
2023-09-19 00:00:07 led-controller[1180]: <7> 288009 Failed to read _ON
2023-09-19 00:00:00 time-settings[1220]: <6> 279504 Service start
1970-01-01 00:00:20 led-controller[1180]: <6> 288504 Service start
- Copy Link
- Report Inappropriate Content
TINZ wrote
Hello
I have same problem with ax73 eu version 1. I have three RE705x in easymesh.
I think if ax73 has client more than 30 clients. It will trigger random reboot only on ax73. All RE705x stay online.
Thank you.
Hi, what is the firmware version of your AX73 V1? and did the automatic rebooting issue started since the firmware update?
Do you mean the issue will be triggered when you connect more than 30 clients to the AX73 router? no issue when no more than 30 clients? and what are your client devices usually?
How often does it happen?
- Copy Link
- Report Inappropriate Content
We have reported the issue to the support engineers, they will likely reach out to you via email to continue to troubleshoot your issue. Please check your email box and confirm.
- Copy Link
- Report Inappropriate Content
@Sunshine I have exactly the same issue. Any chance I could get some support also?
- Copy Link
- Report Inappropriate Content
Hi, please help to confirm the following details before forwarding to senior engineers:
1. When the issue happens, does the AX73 V1 router reboot automatically? or just client device loses connection/internet but the router always stays on?
2. If router stays on when issue happens, will all wired and wireless client devices are affected? and what are the affected devices?
3. When the issue happens, the affected client device will disconnect from the WiFi completely or still shows connected but no internet access?
4. Did you try disabling smart connect and try different WiFi channel and channel width?
5. Do you have any extenders in the same network? If so, is the EasyMesh enabled and a mesh network is established?
6. How often does the issue happen usually? what is the current firmware and did it start since the firmware update?
- Copy Link
- Report Inappropriate Content
@Sunshine
Hello,
Hardware Version:Archer AX73 v1.0 EU
Firmware Version: 1.3.5 Build 20230919 rel.12938(4555)
I have three
RE705X v1.0
1.0.11 Build 20230731 Rel. 41461
xiaomi air purifier 4 lite
xiaomi air purifier 3 pro
LG tv
Samsung TV
xiaomi home security camera
google chomecast 4k
Lenovo Labtop
Ipad
Iphone
Macbook
PC windows 8 on lan
I think this happen after last firmware update. Now AX73 will restart itself at least once a day.
This Wednesday after last random restart. I trying not to have clients more than 30. AX73 online for 2 days now.
No smart connect
2.4ghz 20mhz channel 1
5.0ghz 20/40/80mhz channel auto
- Copy Link
- Report Inappropriate Content
Hi, we would like to escalate your case to the support engineers, and they will help follow it up, if you are willing to do further analysis, please check your email inbox and respond.
- Copy Link
- Report Inappropriate Content
Thank you.
- Copy Link
- Report Inappropriate Content
Please send an updated firmware bin that works. The router has randomly rebooted about 15times since yesterday evening (12 hrs)… I cannot do backups, I cannot print – I work as a photographer and cannot work!! Either send me a fix or please let me know what I can do to bring it back to the last functioning firmware (it won’t let me downgrade) which was Archer AX73(CA)_V1_1.2.3 Build 20230303 Thank you, Liam
also, as an update, the debug bin file your support sent will not upload to the router when connected either wired and/or wireless. "Upload Error" no other information
***Update***
I reset the router to factory settings, reconfigured and was then able to upload the Debug firmware... random rebooting still happening, but I have been sending logs to engineers so fingers crossed!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4037
Replies: 35
Voters 0
No one has voted for it yet.