Archer AX73 v1 - weird after Firmware update to 1.3.5 Build 20230919 rel.12938(4555)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Archer AX73 v1 - weird after Firmware update to 1.3.5 Build 20230919 rel.12938(4555)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
After updating to firmware 1.3.5 Build 20230919 rel.12938(4555) the 5GHz is slow and appear intermittent and simply stop working on occasion. The 2.4GHz is now slow as...
I've changed nothing and really have no clue how to fix it...and it doesn't appear that I'm alone to have issues either?
" Note: This firmware can not be degraded to the previous version. "
If the above applies this router is almost to be considered bricked until a fix comes out?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hey.. It took me a couple of days but I finally figured out what was a problem.
I have another tplink range extender (mesh) that was connected to my main router by cable. It seems like with the previous version of firmware it could automatically configure it to be in the access point mode. The newer firmware fails to configure it automatically and it caused this mesh device to be connected both by cable and wirelessly causing flood. Once I forced this extender to be in the access point mode via its settings interface things went back to normal..
May be it is your case also..
- Copy Link
- Report Inappropriate Content
Hi, you could also try the beta firmware provided in this thread to see if it solves the problem:
Archer AX73 V1&V2 might reboot automatically when working together with some Range Extenders
- Copy Link
- Report Inappropriate Content
Hi, thanks a lot for the feedback.
Normally the access point mode on range extenders needs to be configured manually for both previous firmware and the new firmware, maybe for some reason, your extender working mode was changed back to extender mode.
You could also monitor if there is any further issue, and hope you could enjoy the internet with our products.
- Copy Link
- Report Inappropriate Content
Thank you for the guidence!
I`ve update the FW to 1.3.5 Build 20231213 rel.71357(4555) - beta version.
I will test and will let you know if the connection is better and stable.
My network has two range extenders RE605X (v1 and v2).
- Copy Link
- Report Inappropriate Content
My RE 605x v2 has new FW version 1.0.3 Build 20230907 Rel. 38400.
Should I upgrade or it will affect the service with AX73 and other RE605x V1?
- Copy Link
- Report Inappropriate Content
Hi, normally updating firmware for one range extender will not affect the router and other extenders.
- Copy Link
- Report Inappropriate Content
It was stable for 1 day and a few hours, then reloaded once again and drpped the service.
What could be the next step of investigation?
The setup has AX73 v1, RE 605x v1 and RE 605x v2. Both REs are wirelessly connected.
I have around 45-50 hosts connected via wifi. DHCP reservation list is full as well.
After reload CPU is on 14-24%, RAM on 44%.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 2810
Replies: 17
Voters 1
