I have two TP Link Deco M4's that I just purchased and setup to use with my 1gig internet service. My modem is all setup correctly, and I have tried swapping ethernet cables, but it appears the Deco's are both stuck in 10/100 mode, so my speed caps at 100 whether wired or wireless. I have also tried switching out the Deco hooked to my modem but that doesn't make a difference, as well as scouring the settings trying to find something to get it right, but nothing seems to work. The modem displays an orange light which signifies the 10/100 mode, when it should be green for 10/100/1000. Any help would be greatly appreciated. All firmware updates are done on the decos, so that's also not it. Thank you!