Inoltro porte
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi all,
I have a main router 192.168.1.1 and now I have insert a second line tplink 940n 192.168.2.1 whit l2tp wan internet connection vpn expressvpn provider,but now I haven't more external connection to router,I connect a camera in a lan port,but i can't port forwarding 36666,I use ddns connection test online, for rech the router but all ports can't be open,somebody can help me?Thanks in advance
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Can you please provide the detailed network layout, how are the two routers connected to the network? Is it like below?
main router 192.168.1.1(LAN)----(WAN)TL-WR940N(LAN)----camera
If yes, you need to open the 36666 port on both routers, check the below guide to open the port for the camera on the WR940N:
https://www.tp-link.com/support/faq/1379/
After that, you need to open the same port for the WAN IP address of the WR940N with the port 36666 on the main router, then you should be able to access the camera from an outside network.
- Copy Link
- Report Inappropriate Content
Hi Kevin,
Thanks for your help,I enclose a photo.May you explain step by step in detail which ports should I open and on which ip and on which router?I am not very experieced.For test connection I have to use ddns of main router or ddns of tplink router to connect outside?
Thanks
- Copy Link
- Report Inappropriate Content
192.168.1.81 is the WAN IP address of the WR940N, right?
Open the port 39999 and 95 for the IP 192.168.0.93 on the WR940N, you can refer to the instructions I provided to you earlier.
Then open the port 39999 and 95 for the IP 192.168.1.81 on the main router, as per the port forwarding instructions on the main router, you may need to check with the resource of the brand and model for the router, or you can ask on their community.
- Copy Link
- Report Inappropriate Content
Hi Kevin I enclose photo,i undarstand why port 36666 is again closed?Thanks
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Is the WAN connection type on the WR940N static IP or L2TP? And the WAN IP address is 192.168.1.81? Try to open the 95 and 36666 ports on your main router for the IP 192.168.1.81, then check again. Please ensure the port forwarding setting on your main router is correct, confirm with the router support if you are not sure about it.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 513
Replies: 6
Voters 0
No one has voted for it yet.